Removeable Core Shear Tool Kit #431-6 Instructions

REMOVABLE CORE SHEAR TOOL KIT #431-6

WHEN INSTALLING XC,11- 6300 CORE IN TO ITS EXISTING 60-40 SERIES MORTISE HOUSINGS ONLY:

• REMOVE ORIGINAL CORE AND POSITION THE DRIVE PINS ON THE BACK OF THE HOUSING TO THE HORIZONTAL POSITION
• 2. INSERT THE BODY OF THE SHEAR TOOL SO THAT THE HOLES IN THE BODY ALIGN WITH THE DRIVE PINS. *
• 3. INSERT THE HANDLE ASSEMBLY INTO THE HOLE. 4. WHILE PUSHING FIRMLY ON THE SHEAR TOOL TURN THE HANDLE CLOCKWISE.
• 5. REMOVE THE SHEAR TOOL SLOWLY AND DISCARD THE BRASS PIN THAT HAS JUST BEEN SHEARED OFF.
• 6. REPEAT STEPS 3 THRU 5 FOR THE SECOND PIN HOLE.
• INSERT PERMANENT CORE WITH CONTROL KEY. RODY HANDI F

* NOTE: NOT TO BE USED WITH STEEL PINS. A7719A