2019_Emtek_Multi_Point_LowRes_(2)

Open the original PDF document

View PDF

in door opening solutions

Large Multi Point Entry Sets 14

American Cylinder Hub Above/Below Handle, 35⁄8" Center-to-Center

ref. G-U®

Large Multi Point Entry Sets 18

Euro Cylinder Hub Below Handle, 35⁄8" Center-to-Center

ref. G-U®

EMTEK MULTI POINT LOCK TRIM FOR SWINGING DOORS

CHOOSE TRIMSETS FROM DOOR & LOCK CONFIGURATIONS, AVAILABLE IN BOTH KEYED AND NON-KEYED FUNCTIONS

Door Manufacturers listed under each configuration are for reference only and are subject to change. Some retrofitting may be necessary. Please carefully measure and identify your hardware using the diagrams and steps listed below.

To determine your Multi-Point Lock configuration:

1) Identify the manufacturer of your door and multi-point lock
2) Measure the center-to-center hole spacing between the lever and the cylinder
3) Check the lever position: is it above or below the cylinder?
4) Identify the type of cylinder used in the door: is it American or Euro Profile Cylinder?

Multi Point Lock Trim Price Book Effective October 1, 2018

		PAGE
	Door Configuration #4 American Cylinder Hub Above Handle, 35⁄8" Center-to-Center ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection (formerly Pozzi®), Marvin®, PGT®, Premium Collection (formerly Norco®), Weathershield®	40
	Door Configuration #5 Euro Profile Cylinder Below Handle, 35⁄8" Center-to-Center ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®, Semco®, Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®	46
	Door Configuration #6 American Cylinder Hub Below Handle, 35⁄8" Center-to-Center ref. Milgard®, Pella®	52
	Door Configuration #7 American Cylinder Hub Above Handle, 6" Center-to-Center ref. Trillenium® (formerly W&F Manufacturing)	58
1 5/8" 5 1/4" 8 7/8"	Door Configuration #8 American Cylinder Hub Above Handle, 51/4" Center-to-Center ref. Neuma Doors®	63
	Product Index Order Form Lifetime Limited Warranty	68 70 71

Polished Brass - Lifetime (US3)

Satin Brass (US4)

French Antique

Oil Rubbed Bronze (US10B)

Polished Nickel - Lifetime (US14)

Satin Nickel

Pewter (US15A)

Flat Black

Polished Chrome (US26)

Bronze Patina is a living finish that will gracefully age, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products.

Flat Black Bronze Patina (FB)

Medium Bronze Patina (MB)

Tumbled White Bronze (TWB)

Brushed Stainless Steel carries a five-year finish warranty. All stainless steel will require some periodic cleaning to keep your hardware looking like new.

Brushed Stainless Steel (SS)

Unlacquered Brass (US3NL)

ORDERING AND RETURNS

Placing Orders

You have several options to place an order:

Email: orders@emtek.com
Fax: 800-577-5771
Phone: 800-356-2741, Option 1
Mail: Emtek Products, Inc. 15250 E. Stafford Street City of Industry, CA 91744

Hours of Operation

Monday – Friday: 5:00 AM - 5:00 PM Pacific Time.

Minimum Order Requirements

There are no minimum order quantity requirements.

Payment Terms

Net 30 Days on established credit.

Payment Options

We accept check, Visa, MasterCard, Discover, AMEX, and ACH.

Sales Tax

Sales tax will be charged unless a resale certificate has been provided.

Prices

All prices listed are in US funds. Our prices are subject to change without prior notice.

Returns

For your convenience, returns do not require authorization. Returns can be processed directly from the Emtek website, www.emtek.com.
Click on the "Dealer Site" icon on the right side of the bottom half of the www.emtek.com home page, and then select "Product Returns". Fill out the RGA form, and follow the link to generate a UPS call tag (terms and conditions apply – see the website for details).
A completed RGA form must accompany all packages for returned goods.
Returns are accepted from the Emtek dealer who originally purchased the product that is being returned. Any refund or credit would only be made to the original dealer.
All returned goods are subject to a minimum 25% restocking fee.
Returns for reasons other than an Emtek factory or processing error will be subject to our customary restocking fee with a return freight charge of $15.00 per label/carton in the United States or $30.00 per label/carton in Canada or Mexico. This charge will be deducted from the credit issued for each call tag.
No freight will be charged if the return is sent prepaid.

SHIPPING AND FREIGHT

Shipping Costs

All orders are FOB shipping point. For shipments to dealer specified commercial addresses located in the US, Canada and Mexico, Emtek ships freight prepaid. For shipments to dealers located outside of North America, freight will be prepaid by Emtek to the U.S. location of the dealer's freight forwarder. Orders may ship ground service or LTL at our discretion. Orders shipping to a residential address must ship via 2nd Day with a 20% surcharge.

Shipping Options

Shipments to a commercial address can be upgraded to 2nd Day or Next Day Service for a fee. Orders shipping to a residential address may be upgraded to Next Day Service for a fee. Unfortunately, a dealer's freight account cannot be used to pay for shipping charges.

Delivery Location	Type of Service	Surcharge %*
Commercial Address	Second Day	6%
Commercial Address	Next Day	16%
Residential Address	Second Day (Required)	20%
Residential Address	Next Day	25%

^* Multiplied by invoice value

Order Lead time

Emtek assembles all products to order in City of Industry, California. Orders typically ship within two to three business days once an order is released to the factory.

DEALER INFORMATION PORTAL

Online Account Access

We are pleased to announce that you can now access your Emtek account information through the ASSA ABLOY dealer information portal. Through the dealer portal you can access information about your account at any time. You can:

Check on the status of orders
View both order and sales history
View and print order acknowledgements, invoices, statements and credits
Track shipments

To register for the ASSA ABLOY dealer portal or to make changes to access rights, we require the approval from your company's owner, CEO, President, or other corporate officer. To get started, Click on the "Dealer Site" icon on the bottom half of the www.emtek.com home page, and then select "Forms & Instructions". Please complete the "Dealer Portal Access Rights Form" and email to: dealerportal.emtek@assaabloy.com. Should you have any questions, please contact Customer Service.

NO CHARGE SAMPLE PROGRAM

Sample Program

Samples are gladly provided at no charge to authorized dealers, under the following conditions:

½ Door Lock Dummy (max 2)
½ Pair of Hinges (max 2)
Cabinet Knob or Pull (max 3)
Door Accessory (max 1)

A shipping and handling fee of $2.50 per sample will be applied to your order ($2.50 for one sample, $5.00 for two samples, $7.50 for three samples, etc.)

Sample Order Exceptions

Samples must be different product codes.
Samples do not include active door hardware sets, 8" or larger cabinet pulls, door pulls, appliance pulls, electronic locks, entry sets, bath hardware or door accessories over $75 list.

Placing a Sample Order

Send orders to samples@emtek.com or place by fax, phone, or mail.
Write "NO CHARGE SAMPLE" on the order.
Standard shipment upgrade charges will apply for expedited freight requests.
Orders for sample products must be placed separately and not combined with other products.
Emtek does not require samples to be returned.

No Restocking Fee Charged for Sample Orders with Exceptions

Send orders to samples@emtek.com or place by fax, phone, or mail.
Write "DEALER SAMPLE" on the order.
Keep the samples you want and return the samples you don't.
Contact Customer Service for Return Authorization in advance to ensure a restock fee is not applied to the return.
Product must be returned in its original condition.
Return freight charge of $15.00 per label/carton in the United States or $30.00 per label/carton in Canada or Mexico. This charge will be deducted from the credit issued for each call tag.
No freight will be charged if the return is sent prepaid.

NO CHARGE DISPLAY PROGRAM

Display Program

Emtek offers a variety of quality, well-crafted displays. We take great pride in the quality of our displays, which are hand-built in our Southern California facility by our talented craftsmen.

Click on the "Dealer Site" icon on the right side of the bottom half of the www.emtek.com home page, and then select "Displays".
Browse our online catalog using the navigation system on the left column to view by function, style, or material.

Placing a Display Order

Please contact your local sales representative for ordering information.

Product for use on Displays in your Showroom

Thank you for considering Emtek products for use on door displays and kitchen/ bath vignettes installed in your showroom. Please contact your local sales representative for ordering information.

Minimum Advertised Price Policy Effective February 6, 2017

Emtek has determined that in order to better compete against existing competitors it must exercise a greater degree of control over the distribution of its products. Therefore, all sales of Emtek products will be subject to this Policy. This Policy has been unilaterally adopted and will be enforced strictly and uniformly.

Although resellers remain free to establish their own resale prices, to the extent that any customer elects to advertise products of Emtek in any manner, that is in print, in electronic media, on its website, etc., and provides price information for such products, that price information must be no less than List Price less 20%, this is the Minimum Advertised Price (MAP). Advertisements and offers to sell that do not include a particular price, but require further action that implies a price that is lower than the Minimum Advertised Price violate the MAP Policy. Examples of such unauthorized advertisements include "drop in cart" pricing, "add to cart" pricing, "click to see" pricing, and discount coupon pricing. Also prohibited are advertisements that indicate that discounts may be available when a customer takes specific action that goes beyond buying the product, such as "special price option" or "name your price."

To assure fair business practices, we will strictly enforce this policy. Violations of this MAP Policy will include termination of our business relationship with a customer. On the first offense there will be a written notice counseling any customer that disregards this policy. Any customer who violates the policy a second time, within one year of receiving a written notice of a first violation, will be terminated.

Emtek will not discuss any conditions of acceptance related to this Policy, as it is non-negotiable and will not be altered for any dealer. In addition, Emtek neither solicits, nor will it accept, any assurance of compliance with this Policy. Nothing in this Policy shall constitute an agreement between Emtek and any reseller that the reseller will comply with this Policy.

SELECT BRASS

MODERN BRASS

SOLID BRASS

ARTS & CRAFTS BRASS

^* Note: You will need to ensure the necessary opening/closing clearance when using certain lever designs. Dimensions from the center of the stem to the end of the lever overhang have been provided: T-Bar 3/4", Geneva 11/8", Myles 3/4", Freestone 1", Yuma 11/8".

SANDCAST BRONZE

LOST WAX CAST BRONZE

STAINLESS STEEL

Determining handing for door hardware is different than determining handing for carpentry (ordering and hanging doors). If you follow the standard carpentry rules for handing door hardware, instead of following the diagram below, there is good chance you may end up with a lock that is handed incorrectly. Please refer to the diagram below and if you have any questions, call Customer Service at (800) 356-2741, Option 1.

HANDING OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE

SELECT BRASS

MODERN BRASS

SOLID BRASS

		US3 Lifetime	US4	US7	US10B	US14 Lifetime	US15	US15A	US19	US26	US3NL*
SELECT	L-Square Faceted (LS.FA)
Brass	L-Square Hammered (LS.HA)
Levers	L-Square Knurled (LS.KN)
	L-Square Tribeca (LS.TR)
	T-Bar Faceted (TA.FA)
	T-Bar Hammered (TA.HA)
	T-Bar Knurled (TA.KN)
	T-Bar Tribeca (TA.TR)
Modern	Aireon Lever (A)
Classic	Athena Lever (ATN)
Brass	Hermes Lever (HER)
Levers	Luzern Lever (LU)
	Poseidon Lever (POS)
	Stuttgart Lever (STU)
Modern	Argos Lever (AG)
Designer	Aston Lever (AST)
Brass	Basel Lever (BA)
Levers	Breslin Lever (BRL)
	Dumont Lever (DT)
	Freestone Lever (FRL)
	Geneva Lever (GV)
	Helios Lever (HLO)
	Hercules Lever (HEC)
	Mercury Lever (MC)
	Myles Lever (MYL)
	Sion Lever (SIO)
	Spencer Lever (SPN)
	Triton Lever (TRT)
Classic	Cortina Lever (C)
Brass	Milano Lever (M)
Levers	Rustic Lever (R)
	Turino Lever (T)
Designer	Coventry Lever (CV)
Brass	Elan Lever (EN)
Levers	Merrimack Lever (ME)
	Ribbon & Reed Lever (RBL)
	Rope Lever (RL)
	Santa Fe Lever (SF)
	Wembley Lever (WM)
Arts &	Arts & Crafts Lever (AC)
Crafts	Hammered Lever (HM)

^* Unlacquered Brass (US3NL) is a custom, made-to-order finish. It is available with an upcharge, per item and requires an additional 2-3 day lead time. This living finish will gracefully age and evolve in appearance over time. Because of this characteristic, no finish warranty is offered on unlacquered brass products.

SANDCAST BRONZE

LOST WAX CAST BRONZE

STAINLESS STEEL

Sandcast Bronze Levers

	FB*	MB*	TWB*
Aurora Lever (AR)
Bryce Lever (BR)
Cimarron Lever (CR)
Cody Lever (CD)
Durango Lever (D)
Lariat Lever (LR)
Mariposa Lever (MA)
Montrose Lever (MT)
Teton Lever (TT)
Yuma Lever (YM)

Lost Wax Cast Bronze Levers

	FB*	MB*
Medici Lever (MDI)
Napoli Lever (NA)
Octagon Lever (OCL)
Padua Lever (PD)

Stainless Steel Levers

	SS**
Athena Lever (AT)
Cologne Lever (CO)
Dresden Lever (DD)
Helios Lever (HL)
Hercules Lever (HS)
Hermes Lever (HES)
Kiel Lever (KL)
Poseidon Lever (PO)
Stuttgart Lever (STT)

^* Bronze Patina is a living finish that will gracefully age, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products.

^** Brushed Stainless Steel carries a five-year finish warranty. All stainless steel will require some periodic cleaning to keep your hardware looking like new.

LARGE MULTI POINT ENTRY SETS

American Cylinder Hub, Above / Below Handle 35⁄8" Center to Center

23/8" Minimum Backset Required

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

BRASS PLATES, MODERN RECTANGULAR STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 2.5" x 17.5" Plates		See Page 8 for Brass & Modern Brass Lever	Satin Brass (US4) Oil Rubbed Bronze (US10B)
Keyed with American Cylinder, Hub ABOVE Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1LR1	Options.	Polished Nickel - Lifetime (US14) Satin Nickel (US15)	$364.00
Dummy Pair	1LR2		Flat Black (US19) Polished Chrome (US26)	Unlacquered Brass (US3NL)*	$364.00
Keyed with American Cylinder, Hub BELOW Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1LR3			$364.00
Dummy Pair	1LR4			$364.00
			*Unlacquered Brass (US3NL) finish available for a $50 List Price upcharge per item.

Handing Required

• Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

• Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

Ref. G-U® LARGE MULTI POINT ENTRY SETS

BRASS PLATES, MELROSE STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 2.9" x 17.5" Plates		See Page 8 for Brass & Modern Brass Lever	Polished Brass - Lifetime (US3) French Antique (US7)
Keyed with American Cylinder, Hub ABOVE Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1LM1 Options. Oil Rubbed Bronze (US10B)		Polished Nickel - Lifetime (US14)	$364.00
Dummy Pair	1LM2		Satin Nickel (US15) Pewter (US15A) Flat Black (US19) Polished Chrome (US26) Unlacquered Brass (US3NL)*		$364.00
Keyed with American Cylinder, Hub BELOW Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1LM3			$364.00
Dummy Pair	1LM4			$364.00
			*Unlacquered Brass (US3NL) finish available for a $50 List Price upcharge per item.

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

LARGE MULTI POINT ENTRY SETS

American Cylinder Hub, Above / Below Handle 35⁄8" Center to Center

23/8" Minimum Backset Required

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

SANDCAST BRONZE PLATES, ARCHED STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 3" x 17.5" Plates		See Page 9 for	Flat Black Bronze (FB)
Keyed with American Cylinder, Hub ABOVE Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1LA1	Sandcast Bronze Lever Options.	Medium Bronze (MB)	Tumbled White Bronze (TWB)	$468.00
Dummy Pair	1LA2			$468.00
Keyed with American Cylinder, Hub BELOW Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1LA3			$468.00
Dummy Pair	1LA4			$468.00

Handing Required

• Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

• Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

Keyed Plates with American Cylinder

Standard Door Thickness: from 15/8" to 2"

Standard Components:

Single Cylinder Tailpiece
3 3/4" Steel Spindle
2" Rosette Screws
1 1/2" Rosette Screws for 1 5/8" thick door

Extended Door Thickness: Over 2" to 23/4"

Extended Components:

Long Single Cylinder Tailpiece
4 1/2" Steel Spindle
2 1/2" Rosette Screws
2" Rosette Screws for 2" 2 1/8" thick door

Dummy Plates

Standard Door Thickness: from 15/8" to 2"

Standard Components:

2" Rosette Screws
1 1/2" Rosette Screws for 1 5/8" thick door

Extended Door Thickness: Over 2" to 23/4"

Extended Components:

2 1/2" Rosette Screws
2" Rosette Screws for 2" 2 1/8" thick door

CONSTRUCTION KEYING

Lost ball system.
Last four pin locations drilled for lost ball application.
Master key pins used for code variability.
Construction keys and owner keys sent separately.
Order by indicating " Construction Keyed, House # _" next to applicable locks.

- Construction devices used on one or more of last four positions.

- Dimples drilled in plug in this position.

Charge for Construction Keying - $3.00 (NET)

• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder

• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code

• Order by indicating "Key Code XXXXX " next to applicable locks.

Keying Alike

Order by indicating "Keyed Alike" next to applicable locks if only one keyed alike group is wanted.
If ordering multiple groups (houses) indicate " Keyed Alike House # _" next to applicable locks.

LARGE MULTI POINT ENTRY SETS

Euro Cylinder Hub, Below Handle 35⁄8" Center to Center

23/8" Minimum Backset Required

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

BRASS PLATES, MODERN RECTANGULAR STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 2.5" x 17.5" Plates		See Page 8 for Brass & Modern Brass Lever	Satin Brass (US4) Oil Rubbed Bronze (US10B)
Keyed with Euro Profile Cylinder , Hub BELOW Handle (Schlage® Keyway standard, Rekeyable)	2LR1	Options.	Polished Nickel - Lifetime (US14) Satin Nickel (US15)	$364.00
Dummy Pair	2LR2		Flat Black (US19) Polished Chrome (US26) Unlacquered Brass (US3NL)*	$364.00
			*Unlacquered Brass (US3NL) finish available for a $50 List Price upcharge per item.

Handing Required

• Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser® keyway not available with Euro cylinder.

Ref. G-U® LARGE MULTI POINT ENTRY SETS

BRASS PLATES, MELROSE STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 2.9" x 17.5" Plates		See Page 8 for Brass & Modern Brass Lever Options.	Polished Brass - Lifetime (US3) French Antique (US7)
Keyed with Euro Profile Cylinder , Hub BELOW Handle	2LM1	See Page 8 for Brass & Modern Brass Lever Options.	Oil Rubbed Bronze (US10B)	$364.00
(Schlage® Keyway standard, Rekeyable)			Polished Nickel - Lifetime (US14)
Dummy Pair	2LM2		Satin Nickel (US15) Pewter (US15A) Flat Black (US19) Polished Chrome (US26) Unlacquered Brass (US3NL)* *Unlacquered Brass (US3NL) finish available for a $50 List Price upcharge per item.	$364.00

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Weiser® keyway not available with Euro cylinder.

LARGE MULTI POINT ENTRY SETS

Euro Cylinder Hub, Below Handle 35/8" Center to Center

23/8" Minimum Backset Required

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

SANDCAST BRONZE PLATES, ARCHED STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 3" x 17.5" Plates		See Page 9 for Sandcast Bronze Lever	Flat Black Bronze (FB)
Keyed with Euro Profile Cylinder , Hub BELOW Handle	2LA1	Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)	$468.00
(Schlage® Keyway standard, Rekeyable)
Dummy Pair	2LA2			$468.00

Handing Required

Key codes may be specified. Fits standard door thickness of 1¾". Specify if thicker.
$\bullet \ \, \text{Set includes plates, handles and cylinders (where applicable)}. \ \, \text{Multi Point lock mechanism is not included.}$

Weiser® keyway not available with Euro cylinder.

Specification Sheet for Trim and Cylinder Styles LARGE MULTI POINT ENTRY SETS

Keyed Plates with Euro Profile Cylinder

Standard Components:

2 9/16" Euro Profile Cylinder
3 3/4" Steel Spindle
1 1/2" Rosette Screws

Extended Components:

3 5/32" Euro Profile Cylinder
4 1/2" Steel Spindle
2" Rosette Screws

Standard Door Thickness: from 15/8" to 2" Extended Door Thickness: Over 2" to 21/2" Extended Door Thickness: Over 21/2"to 23/4"

Extended Components:

3 17/32" Euro Profile Cylinder
5" Steel Spindle
3" Rosette Screws

Dummy Plates

Standard Door Thickness: from 15/8" to 2" Extended Door Thickness: Over 2" to 23/4"

Standard Components:

2" Rosette Screws
1 1/2" Rosette Screws for 1 5/8" thick door

Extended Components:

2 1/2" Rosette Screws
2" Rosette Screws for 2" 2 1/8" thick door

CUSTOM KEYING

Charge for Re-Keying - $2.00 (NET) per Cylinder

• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code

• Order by indicating "Key Code XXXXX " next to applicable locks.

Keying Alike

Order by indicating "Keyed Alike" next to applicable locks if only one keyed alike group is wanted.
If ordering multiple groups (houses) indicate " Keyed Alike House # _" next to applicable locks.

American Cylinder Hub Below Handle 35⁄8" Center-to-Center

ref. Atrium®, G-U®, KML by Andersen®, Andersen® Marvin Integrity®, Paddock Lockmaster™, Superior®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

BRASS PLATES, CONCORD STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 8 for Brass & Modern	Polished Brass - Lifetime (US3) French Antique (US7)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1171	Brass Lever Options.	Oil Rubbed Bronze (US10B) Satin Nickel (US15)
Non-Keyed Passage	1172		Pewter (US15A)
Non-Keyed American Style Thumbturn Inside	1173		Flat Black (US19)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1174		Polished Chrome (US26) Unlacquered Brass (US3NL)*
Dummy Pair	1175		Polished Chrome (US26) Unlacquered Brass (US3NL)*
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1181
Non-Keyed Passage	1182
Non-Keyed American Style Thumbturn Inside	1183		*Unlacquered Brass (US3NL)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1184		finish available for a $40 List Price
Dummy Pair	1185		upcharge per item.

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

BRASS PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 1½" x 11" Plates		See Page 8 for Brass & Modern	Satin Brass (US4) Oil Rubbed Bronze (US10B)	$203.00
Keyed with American Cylinder	11A1	Brass Lever	Polished Nickel - Lifetime (US14)
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)		Options.	Satin Nickel (US15)
Non-Keyed Passage	11A2		Flat Black (US19)
Non-Keyed American Style Thumbturn Inside	11A3	1	Polished Chrome (US26) Unlacquered Brass (US3NL)*
Non-Keyed Fixed Handle Outside, Operating Handle Inside	11A4
Dummy Pair	11A5
Sets with 2" x 10" Plates
Keyed with American Cylinder	11 B 1
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage	11 B 2		VII. 1. 1. (1.65.)	1
Non-Keyed American Style Thumbturn Inside	11 B 3		*Unlacquered Brass (US3NL)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	11 B 4		finish available for a $40 List Price upcharge per item.
Dummy Pair	11 B 5		finish available for a $40 List Price upcharge per item.

STAINLESS STEEL PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11/2" x 11" Plates		See Page 9 for Stainless Steel	Stainless Steel (SS)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	11A1	Lever Options.
Non-Keyed Passage	11A2
Non-Keyed American Style Thumbturn Inside	11A3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	11A4
Dummy Pair	11A5
Sets with 2" x 10" Plates
Keyed with American Cylinder	11 B 1
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage	11 B 2
Non-Keyed American Style Thumbturn Inside	11 B 3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	11 B 4
Dummy Pair	11 B 5

Handing Required

Key codes may be specified. Fits standard door thickness of 1¾". Specify if thicker.
$\bullet \ \, \text{Set includes plates, handles and cylinders (where applicable)}. \ \, \text{Multi Point lock mechanism is not included.}$

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

emtek.com 800.356.2741

American Cylinder Hub Below Handle 35⁄8" Center-to-Center

ref. Atrium®, G-U®, KML by Andersen®, Andersen® Marvin Integrity®, Paddock Lockmaster™, Superior®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

SANDCAST BRONZE PLATES, ARCHED STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1111	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1112
Non-Keyed American Style Thumbturn Inside	1113
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1114
Dummy Pair	1115
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1121
Non-Keyed Passage	1122
Non-Keyed American Style Thumbturn Inside	1123
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1124
Dummy Pair	1125

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

SANDCAST BRONZE PLATES, RECTANGULAR STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1151	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1152
Non-Keyed American Style Thumbturn Inside	1153
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1154
Dummy Pair	1155
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1161
Non-Keyed Passage	1162
Non-Keyed American Style Thumbturn Inside	1163
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1164
Dummy Pair	1165

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for Lost	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1131	Wax Cast Bronze Lever Options.	Medium Bronze (MB)
Non-Keyed Passage	1132
Non-Keyed American Style Thumbturn Inside	1133
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1134
Dummy Pair	1135
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1141
Non-Keyed Passage	1142
Non-Keyed American Style Thumbturn Inside	1143
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1144
Dummy Pair	1145

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

Door Configuration # 1 American Cylinder Below Handle 3 5/8" Center-to-Center

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside

Standard Components: • Single Cylinder Tailpiece • 3 3/4" Steel Spindle • 2" Rosette Screws • 1 1/2" Rosette Screws for 1 5/8" thick door Extended Components: • Long Single Cylinder Tailpiece • 4 1/2" Steel Spindle • 2 1/2" Rosette Screws • 2" Rosette Screws for 2" - 2 1/8" thick door Standard Door Thickness: from 15/8" to 2" Extended Door Thickness: Over 2" to 23/4"

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)

Standard Door Thickness: from 15/8" to 2"	Extended Door Thickness: Over 2" to 23/4"
Standard Components:	Extended Components:
• Thumbturn Tailpiece	• Long Thumbturn Tailpiece
• 3 3/4" Steel Spindle (half-spindle for fixed handle out/operating handle in)	• 4 1/2" Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2" Rosette Screws	• 2 1/2" Rosette Screws
• 1 1/2" Rosette Screws for 1 5/8" thick door	• 2" Rosette Screws for 2" - 2 1/8" thick door

CONSTRUCTION KEYING

Lost ball system.
Last four pin locations drilled for lost ball application.
Master key pins used for code variability.
Construction keys and owner keys sent separately.
Order by indicating " Construction Keyed, House # _" next to applicable locks.

- Construction devices used on one or more of last four positions.

- Dimples drilled in plug in this position.

Charge for Construction Keying - $3.00 (NET)

• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder

• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code

• Order by indicating "Key Code XXXXX " next to applicable locks.

Keying Alike

Order by indicating "Keyed Alike" next to applicable locks if only one keyed alike group is wanted.
If ordering multiple groups (houses) indicate " Keyed Alike House # _" next to applicable locks.

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)

Non-Keyed, Passage (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1112, 1132, 1152, 1172, 11A2 2" x 10" Plates, Product Codes 1122, 1142, 1162, 1182, 11B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1114, 1134, 1154, 1174, 11A4 2" x 10" Plates, Product Codes 1124, 1144, 1164, 1184, 11B4

Dummy Pair (for Non-Active Door)

1 1/2" x 11" Plates, Product Codes 1115, 1135, 1155, 1175, 11A5 2" x 10" Plates, Product Codes 1125, 1145, 1165, 1185, 11B5

American Cylinder Hub Above Handle 35⁄8" Center-to-Center

ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

BRASS PLATES, CONCORD STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 8 for	Polished Brass - Lifetime (US3)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1271	Brass & Modern Brass Lever Options.	French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15)
Non-Keyed Passage	1272		Pewter (US15A)
Non-Keyed American Style Thumbturn Inside	1273		Flat Black (US19)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1274		Polished Chrome (US26) Unlacquered Brass (US3NL)*
Dummy Pair	1275		Polished Chrome (US26) Unlacquered Brass (US3NL)*
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1281
Non-Keyed Passage	1282
Non-Keyed American Style Thumbturn Inside	1283		*Unlacquered Brass (US3NL)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1284		finish available for a $40 List Price
Dummy Pair	1285		upcharge per item.

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

BRASS PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11/2" x 11" Plates		See Page 8 for	Satin Brass (US4)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	12A1	Brass & Modern Brass Lever Options.	Oil Rubbed Bronze (US10B) Polished Nickel - Lifetime (US14) Satin Nickel (US15)
Non-Keyed Passage	12A2	Орионз.	Flat Black (US19)
Non-Keyed American Style Thumbturn Inside	12A3		Polished Chrome (US26)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	12A4	•	Unlacquered Brass (US3NL)*
Dummy Pair	12A5
Sets with 2" x 10" Plates	127.0
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	12 B 1
Non-Keyed Passage	12 B 2	-
Non-Keyed American Style Thumbturn Inside	12 B 3	1	*Unlacquered Brass (US3NL)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	12 B 4		finish available for a $40 List Price
Dummy Pair	12 B 5		upcharge per item.

STAINLESS STEEL PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 1½" x 11" Plates		See Page 9 for Stainless Steel	Stainless Steel (SS)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	12A1	Lever Options.
Non-Keyed Passage	12A2
Non-Keyed American Style Thumbturn Inside	12A3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	12A4
Dummy Pair	12A5
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	12 B 1
Non-Keyed Passage	12 B 2
Non-Keyed American Style Thumbturn Inside	12 B 3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	12 B 4
Dummy Pair	12 B 5

Handing Required

Key codes may be specified. Fits standard door thickness of 1¾". Specify if thicker.
$\bullet \ \, \text{Set includes plates, handles and cylinders (where applicable)}. \ \, \text{Multi Point lock mechanism is not included}. \\$

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

emtek.com 800.356.2741

American Cylinder Hub Above Handle 35⁄8" Center-to-Center

ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

SANDCAST BRONZE PLATES, ARCHED STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1211	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1212
Non-Keyed American Style Thumbturn Inside	1213
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1214
Dummy Pair	1215
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1221
Non-Keyed Passage	1222
Non-Keyed American Style Thumbturn Inside	1223
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1224
Dummy Pair	1225

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

SANDCAST BRONZE PLATES, RECTANGULAR STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1251	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1252
Non-Keyed American Style Thumbturn Inside	1253
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1254
Dummy Pair	1255
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1261
Non-Keyed Passage	1262
Non-Keyed American Style Thumbturn Inside	1263
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1264
Dummy Pair	1265

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for Lost	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1231	Wax Cast Bronze Lever Options.	Medium Bronze (MB)
Non-Keyed Passage	1232
Non-Keyed American Style Thumbturn Inside	1233
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1234
Dummy Pair	1235
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)	1241
Non-Keyed Passage	1242
Non-Keyed American Style Thumbturn Inside	1243
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1244
Dummy Pair	1245

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

Door Configuration #2 American Cylinder Above Handle 3 5/8" Center-to-Center

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside

Standard Door Thickness: from 15/8" to 2"	Extended Door Thickness: Over 2" to 23/4"
Standard Components:	Extended Components:
• Single Cylinder Tailpiece	• Long Single Cylinder Tailpiece
• 3 3/4" Steel Spindle	• 4 1/2" Steel Spindle
• 2" Rosette Screws	• 2 1/2" Rosette Screws
• 1 1/2" Rosette Screws for 1 5/8" thick door	• 2" Rosette Screws for 2" - 2 1/8" thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)


Standard Door Thickness: from 15/8" to 2"	Extended Door Thickness: Over 2" to 23/4"
Standard Components:	Extended Components:
• Thumbturn Tailpiece	• Long Thumbturn Tailpiece
• 3 3/4" Steel Spindle (half-spindle for fixed handle out/operating handle in)	• 4 1/2" Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2" Rosette Screws	• 2 1/2" Rosette Screws
• 1 1/2" Rosette Screws for 1 5/8" thick door	• 2" Rosette Screws for 2" - 2 1/8" thick door

CONSTRUCTION KEYING

Lost ball system.
Last four pin locations drilled for lost ball application.
Master key pins used for code variability.
Construction keys and owner keys sent separately.
Order by indicating " Construction Keyed, House # _" next to applicable locks.

- Construction devices used on one or more of last four positions.

- Dimples drilled in plug in this position.

Charge for Construction Keying - $3.00 (NET)

• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder

• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code

• Order by indicating "Key Code XXXXX " next to applicable locks.

Keying Alike

Order by indicating "Keyed Alike" next to applicable locks if only one keyed alike group is wanted.
If ordering multiple groups (houses) indicate " Keyed Alike House # _" next to applicable locks.

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)

1 1/2" x 11" Plates, Product Codes 1211, 1231, 1251, 1271, 12A1

Non-Keyed, Passage (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1212, 1232, 1252, 1272, 12A2

Non-Keyed, American Style Thumbturn Inside (for Active Door)

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1214, 1234, 1254, 1274, 12A4

Dummy Pair (for Non-Active Door)

Fixed Fixed

American Cylinder Hub Above Handle 41⁄8" Center-to-Center

ref. Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

BRASS PLATES, CONCORD STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 8 for Brass & Modern	Polished Brass - Lifetime (US3)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1371	Brass Lever Options.	French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15)
Non-Keyed Passage	1372		Pewter (US15A)
Non-Keyed American Style Thumbturn Inside	1373		Flat Black (US19)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1374		Polished Chrome (US26) Unlacquered Brass (US3NL)*
Dummy Pair	1375		Polished Chrome (US26) Unlacquered Brass (US3NL)*
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1381
Non-Keyed Passage	1382
Non-Keyed American Style Thumbturn Inside	1383		*Unlacquered Brass (US3NL)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1384		finish available for a $40 List Price
Dummy Pair	1385		upcharge per item.

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

BRASS PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11/2" x 11" Plates		See Page 8 for Brass & Modern	Satin Brass (US4) Oil Rubbed Bronze (US10B)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	13A1	Brass & Modern Brass Lever Options.	Polished Nickel - Lifetime (US14) Satin Nickel (US15)
Non-Keyed Passage	13A2		Flat Black (US19)
Non-Keyed American Style Thumbturn Inside	13A3		Polished Chrome (US26)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	13A4		Unlacquered Brass (US3NL)*
Dummy Pair	13A5
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	13 B 1
Non-Keyed Passage	13 B 2
Non-Keyed American Style Thumbturn Inside	13 B 3		*Unlacquered Brass (US3NL)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	13 B 4		finish available for a $40 List Price
Dummy Pair	13 B 5		upcharge per item.

STAINLESS STEEL PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 1½" x 11" Plates		See Page 9 for	Stainless Steel (SS)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	13A1	Stainless Steel Lever Options.
Non-Keyed Passage	13A2
Non-Keyed American Style Thumbturn Inside	13A3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	13A4	_
Dummy Pair	13A5
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	13 B 1
Non-Keyed Passage	13 B 2
Non-Keyed American Style Thumbturn Inside	13 B 3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	13 B 4
Dummy Pair	13 B 5

Handing Required

Key codes may be specified. Fits standard door thickness of 1¾". Specify if thicker.
$\bullet \ \, \text{Set includes plates, handles and cylinders (where applicable)}. \ \, \text{Multi Point lock mechanism is not included.}$

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
$\bullet \ \ \text{No upcharge for cylinder substitution. Can be keyed into existing Weiser} \\ \circ \ \ \text{system}.$

American Cylinder Hub Above Handle 41⁄8" Center-to-Center

ref. Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

SANDCAST BRONZE PLATES, ARCHED STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1311	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1312
Non-Keyed American Style Thumbturn Inside	1313
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1314
Dummy Pair	1315
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1321
Non-Keyed Passage	1322
Non-Keyed American Style Thumbturn Inside	1323
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1324
Dummy Pair	1325

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

SANDCAST BRONZE PLATES, RECTANGULAR STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1351	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1352
Non-Keyed American Style Thumbturn Inside	1353
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1354
Dummy Pair	1355
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1361
Non-Keyed Passage	1362
Non-Keyed American Style Thumbturn Inside	1363
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1364
Dummy Pair	1365

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for Lost	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1331	Wax Cast Bronze Lever Options.	Medium Bronze (MB)
Non-Keyed Passage	1332
Non-Keyed American Style Thumbturn Inside	1333
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1334
Dummy Pair	1335
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1341
Non-Keyed Passage	1342
Non-Keyed American Style Thumbturn Inside	1343
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1344
Dummy Pair	1345

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

Door Configuration #3 American Cylinder Above Handle 4 1/8" Center-to-Center

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside

Standard Door Thickness: from 15/8" to 2"

Standard Components:

Single Cylinder Tailpiece
3 3/4" Steel Spindle
2" Rosette Screws
1 1/2" Rosette Screws for 1 5/8" thick door

Extended Door Thickness: Over 2" to 23/4"

Extended Components:

Single Cylinder Tailpiece
4 1/2" Steel Spindle
2 1/2" Rosette Screws
2" Rosette Screws for 2" 2 1/8" thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)

Standard Door Thickness: from 15/8" to 2"

Standard Components:

Configuration #3 Thumbturn Tailpiece
3 3/4" Steel Spindle (half-spindle for fixed handle out/operating handle in)
2" Rosette Screws
1 1/2" Rosette Screws for 1 5/8" thick door

Extended Door Thickness: Over 2" to 23/4"

Extended Components:

Configuration #3 Thumbturn Tailpiece
4 1/2" Steel Spindle (half-spindle for fixed handle out/operating handle in)
2 1/2" Rosette Screws
2" Rosette Screws for 2" 2 1/8" thick door

CONSTRUCTION KEYING

Lost ball system.
Last four pin locations drilled for lost ball application.
Master key pins used for code variability.
Construction keys and owner keys sent separately.
Order by indicating " Construction Keyed, House # _" next to applicable locks.

- Construction devices used on one or more of last four positions.

- Dimples drilled in plug in this position.

Charge for Construction Keying - $3.00 (NET)

• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder

• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code

• Order by indicating "Key Code XXXXX " next to applicable locks.

Keying Alike

Order by indicating "Keyed Alike" next to applicable locks if only one keyed alike group is wanted.
If ordering multiple groups (houses) indicate " Keyed Alike House # _" next to applicable locks.

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Andersen®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)

1 1/2" x 11" Plates, Product Codes 1311, 1331, 1351, 1371, 13A1

Non-Keyed, Passage (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1312, 1332, 1352, 1372, 13A2

Non-Keyed, American Style Thumbturn Inside (for Active Door)

1 1/2" x 11" Plates, Product Codes 1313, 1333, 1353, 1373, 13A3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1314, 1334, 1354, 1374, 13A4

Dummy Pair (for Non-Active Door)

1 1/2" x 11" Plates, Product Codes 1315, 1335, 1355, 1375, 13A5

American Cylinder Hub Above Handle 35⁄8" Center-to-Center

ref. Ashland®, G-U®, Caradco®, JELD-WEN® Jeldwen® Custom Collection (formerly Pozzi®) Marvin®, PGT®, Premium Collection (formerly Norco®) Weathershield®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

See Configuration #1 for Marvin Integrity® Doors

BRASS PLATES, CONCORD STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 8 for	Polished Brass - Lifetime (US3)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1471	Brass & Modern Brass Lever Options.	French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15)
Non-Keyed Passage	1472		Pewter (US15A)
Non-Keyed American Style Thumbturn Inside	1473		Flat Black (US19)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1474		Polished Chrome (US26) Unlacquered Brass (US3NL)*
Dummy Pair	1475
Sets with 2" x 10" Plates
Keyed with American Cylinder	1481
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage	1482
Non-Keyed American Style Thumbturn Inside	1483		*Unlacquered Brass (US3NL)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1484		finish available for a $40 List Price
Dummy Pair	1485		upcharge per item.

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

BRASS PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11/2" x 11" Plates		See Page 8 for	Satin Brass (US4)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	14A1	Brass & Modern Brass Lever Options.	Oil Rubbed Bronze (US10B) Polished Nickel - Lifetime (US14) Satin Nickel (US15)
Non-Keyed Passage	14A2		Flat Black (US19)
Non-Keyed American Style Thumbturn Inside	14A3		Polished Chrome (US26)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	14A4		Unlacquered Brass (US3NL)*
Dummy Pair	14A5
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	14 B 1
Non-Keyed Passage	14 B 2			ĺ
Non-Keyed American Style Thumbturn Inside	14 B 3		*Unlacquered Brass (US3NL)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	14 B 4		finish available for a $40 List Price
Dummy Pair	14 B 5		upcharge per item.

STAINLESS STEEL PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 1½" x 11" Plates		See Page 9 for	Stainless Steel (SS)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	14A1	Stainless Steel Lever Options.
Non-Keyed Passage	14A2
Non-Keyed American Style Thumbturn Inside	14A3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	14A4
Dummy Pair	14A5
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	14 B 1
Non-Keyed Passage	14 B 2
Non-Keyed American Style Thumbturn Inside	14 B 3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	14 B 4
Dummy Pair	14 B 5

Handing Required

Key codes may be specified. Fits standard door thickness of 1¾". Specify if thicker.
$\bullet \ \, \text{Set includes plates, handles and cylinders (where applicable)}. \ \, \text{Multi Point lock mechanism is not included.}$

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
$\bullet$ No upcharge for cylinder substitution. Can be keyed into existing Weiser $\!\!\!^{\circ}$ system.

American Cylinder Hub Above Handle 35⁄8" Center-to-Center

ref. Ashland®, G-U®, Caradco®, JELD-WEN® Jeldwen® Custom Collection (formerly Pozzi®) Marvin®, PGT®, Premium Collection (formerly Norco®) Weathershield®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

See Configuration #1 for Marvin Integrity® Doors

SANDCAST BRONZE PLATES, ARCHED STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1411	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1412
Non-Keyed American Style Thumbturn Inside	1413
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1414
Dummy Pair	1415
Sets with 2" x 10" Plates
Keyed with American Cylinder	1421
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage	1422
Non-Keyed American Style Thumbturn Inside	1423
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1424
Dummy Pair	1425

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

SANDCAST BRONZE PLATES, RECTANGULAR STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1451	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1452
Non-Keyed American Style Thumbturn Inside	1453
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1454
Dummy Pair	1455
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1461
Non-Keyed Passage	1462
Non-Keyed American Style Thumbturn Inside	1463
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1464
Dummy Pair	1465

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for Lost	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1431	Wax Cast Bronze Lever Options.	Medium Bronze (MB)
Non-Keyed Passage	1432
Non-Keyed American Style Thumbturn Inside	1433
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1434
Dummy Pair	1435
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1441
Non-Keyed Passage	1442
Non-Keyed American Style Thumbturn Inside	1443
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1444
Dummy Pair	1445

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

Door Configuration #4 American Cylinder Above Handle 3 5/8" Center-to-Center

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside

Standard Door Thickness: from 15/8" to 2"

Standard Components:

Single Cylinder Tailpiece
3 3/4" Steel Spindle
2" Rosette Screws for 1 5/8" 1 3/4" thick door
2 1/2" Rosette Screws for 1 3/4" 2" thick door

Extended Door Thickness: Over 2" to 23/4"

Extended Components:

Long Single Cylinder Tailpiece
4 1/2" Steel Spindle
2 1/2" Rosette Screws 2" 2 1/4" think door
3" Rosette Screws for 2 1/4" 2 3/4" thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)

Standard Door Thickness: from 15/8" to 2"

Standard Components:

Thumbturn Tailpiece
3 3/4" Steel Spindle (half-spindle for fixed handle out/operating handle in)
2" Rosette Screws for 1 5/8" 1 3/4" thick door
2 1/2" Rosette Screws for 1 3/4" 2" thick door

Extended Door Thickness: Over 2" to 23/4"

Extended Components:

Long Thumbturn Tailpiece
4 1/2" Steel Spindle (half-spindle for fixed handle out/operating handle in)
2 1/2" Rosette Screws 2" 2 1/4" think door
3" Rosette Screws for 2 1/4" 2 3/4" thick door

CONSTRUCTION KEYING

Lost ball system.
Last four pin locations drilled for lost ball application.
Master key pins used for code variability.
Construction keys and owner keys sent separately.
Order by indicating " Construction Keyed, House # _" next to applicable locks.

- Construction devices used on one or more of last four positions.

- Dimples drilled in plug in this position.

Charge for Construction Keying - $3.00 (NET)

• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder

• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code

• Order by indicating "Key Code XXXXX " next to applicable locks.

Keying Alike

Order by indicating "Keyed Alike" next to applicable locks if only one keyed alike group is wanted.
If ordering multiple groups (houses) indicate " Keyed Alike House # _" next to applicable locks.

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection (formerly Pozzi®), Marvin®, PGT®, Premium Collection (formerly Norco®), Weathershield®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)

Non-Keyed, Passage (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1412, 1432, 1452, 1472, 14A2

Non-Keyed, American Style Thumbturn Inside (for Active Door)

1 1/2" x 11" Plates, Product Codes 1413, 1433, 1453, 1473, 14A3

2" x 10" Plates, Product Codes 1423, 1443, 1463, 1483, 14B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1414, 1434, 1454, 1474, 14A4

Dummy Pair (for Non-Active Door)

1 1/2" x 11" Plates, Product Codes 1415, 1435, 1455, 1475, 14A5

2" x 10" Plates, Product Codes 1425, 1445, 1465, 1485, 14B5

Euro Profile Cylinder Below Handle 35⁄8" Center-to-Center

ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe® Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree® Semco®, Sierra Pacific®, Signature®, Simpson® Therma-Tru®, Vetter®, Willmar®, Windsor® Weathershield®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

BRASS PLATES, CONCORD STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	1571	See Page 8 for Brass & Modern Brass Lever Options.	Polished Brass - Lifetime (US3) French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15)	$203.00
Non-Keyed Passage	1572		Pewter (US15A)
Non-Keyed Euro Profile Thumbturn Inside	1573		Flat Black (US19)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1574		Polished Chrome (US26) Unlacquered Brass (US3NL)*
Dummy Pair	1575
Sets with 2" x 10" Plates
Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	1581
Non-Keyed Passage	1582
Non-Keyed Euro Profile Thumbturn Inside	1583		*Unlacquered Brass (US3NL) finish available for a $40 List Price
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1584		upcharge per item.
Dummy Pair	1585

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Weiser® keyway not available for Configuration 5, Euro cylinder.

BRASS PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 1½" x 11" Plates		See Page 8 for Brass & Modern	Satin Brass (US4) Oil Rubbed Bronze (US10B)	$203.00
Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	15A1	Brass & Modern Brass Lever Options.	Polished Nickel - Lifetime (US14) Satin Nickel (US15)
Non-Keyed Passage	15A2		Flat Black (US19)
Non-Keyed Euro Profile Thumbturn Inside	15A3		Polished Chrome (US26)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	15A4		Unlacquered Brass (US3NL)*
Dummy Pair	15A5
Sets with 2" x 10" Plates
Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	15 B 1
Non-Keyed Passage	15 B 2
Non-Keyed Euro Profile Thumbturn Inside	15 B 3		*Unlacquered Brass (US3NL)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	15 B 4
Dummy Pair	15 B 5		upcharge per item.
, , , ,			finish available for a $40 List Price upcharge per item.	L

STAINLESS STEEL PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 1½" x 11" Plates		See Page 9 for	Stainless Steel (SS)	$203.00
Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	15A1	Stainless Steel Lever Options.
Non-Keyed Passage	15A2
Non-Keyed Euro Profile Thumbturn Inside	15A3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	15A4
Dummy Pair	15A5
Sets with 2" x 10" Plates
Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	15 B 1
Non-Keyed Passage	15 B 2
Non-Keyed Euro Profile Thumbturn Inside	15 B 3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	15 B 4
Dummy Pair	15 B 5

Handing Required

Key codes may be specified. Fits standard door thickness of 1¾". Specify if thicker.
$\bullet \ \, \text{Set includes plates, handles and cylinders (where applicable)}. \ \, \text{Multi Point lock mechanism is not included.}$

Weiser® keyway not available for Configuration 5, Euro cylinder.

emtek.com 800.356,2741

Euro Profile Cylinder Below Handle 35⁄8" Center-to-Center

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

SANDCAST BRONZE PLATES, ARCHED STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	1511	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1512
Non-Keyed Euro Profile Thumbturn Inside	1513
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1514
Dummy Pair	1515
Sets with 2" x 10" Plates
Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	1521
Non-Keyed Passage	1522
Non-Keyed Euro Profile Thumbturn Inside	1523
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1524
Dummy Pair	1525

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Weiser® keyway not available for Configuration 5, Euro cylinder.

Sandcast Rectangular
2" x 10" Non-Keyed

SANDCAST BRONZE PLATES, RECTANGULAR STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	1551	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1552
Non-Keyed Euro Profile Thumbturn Inside	1553
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1554
Dummy Pair	1555
Sets with 2" x 10" Plates
Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	1561
Non-Keyed Passage	1562
Non-Keyed Euro Profile Thumbturn Inside	1563
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1564
Dummy Pair	1565

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for Lost	Flat Black Bronze (FB)	$226.00
Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	1531	Wax Cast Bronze Lever Options.	Medium Bronze (MB)
Non-Keyed Passage	1532
Non-Keyed Euro Profile Thumbturn Inside	1533
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1534
Dummy Pair	1535
Sets with 2" x 10" Plates
Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable)	1541
Non-Keyed Passage	1542
Non-Keyed Euro Profile Thumbturn Inside	1543
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1544
Dummy Pair	1545

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Weiser® keyway not available for Configuration 5, Euro cylinder.

Door Configuration #5 Euro Profile Cylinder Below Handle 3 5/8" Center-to-Center

Full Euro Profile Cylinder Half Euro Profile Cylinder

Keyed Plates with Euro Profile Cylinder

Standard Components:

2 9/16" Euro Profile Cylinder
3 3/4" Steel Spindle
1 1/2" Rosette Screws

Standard Door Thickness: from 15/8" to 2" Extended Door Thickness: Over 2" to 21/2" Extended Door Thickness: Over 21/2"to 23/4"

Extended Components:

3 5/32" Euro Profile Cylinder
4 1/2" Steel Spindle
2" Rosette Screws

Extended Components:

3 17/32" Euro Profile Cylinder
5" Steel Spindle
3" Rosette Screws

Non-Keyed Plates with Euro Profile Half Cylinder

Standard Components:

1 21/32" Euro Profile Half-Cylinder
3 3/4" Steel Spindle
1 1/2" Rosette Screws

Extended Components:

1 31/32" Euro Profile Half-Cylinder
4 1/2" Steel Spindle
2" Rosette Screws

Standard Door Thickness: from 15/8" to 2" Extended Door Thickness: Over 2" to 21/2" Extended Door Thickness: Over 21/2"to 23/4"

Extended Components:

2 5/32" Euro Profile Half-Cylinder
5" Steel Spindle
3" Rosette Screws

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)

Standard Components:

3 3/4" Steel Spindle (half-spindle for fixed handle out/operating handle in)
2" Rosette Screws
1 1/2" Rosette Screws for 1 5/8" thick door

Standard Door Thickness: from 15/8" to 2" Extended Door Thickness: Over 2" to 23/4"

Extended Components:

4 1/2" Steel Spindle (half-spindle for fixed handle out/operating handle in)
2 1/2" Rosette Screws
2" Rosette Screws for 2" 2 1/8" thick door

CUSTOM KEYING

Charge for Re-Keying - $2.00 (NET) per Cylinder

• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code

• Order by indicating "Key Code XXXXX " next to applicable locks.

Keying Alike

Order by indicating "Keyed Alike" next to applicable locks if only one keyed alike group is wanted.
If ordering multiple groups (houses) indicate " Keyed Alike House # _" next to applicable locks.

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®, Semco®, Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®

Keyed with Euro Profile Cylinder (for Active Door, Schlage® Keyway Standard, Rekeyable)

1 1/2" x 11" Plates, Product Codes 1511, 1531, 1551, 1571, 15A1

2" x 10" Plates, Product Codes 1521, 1541, 1561, 1581, 15B1

Non-Keyed, Passage (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1512, 1532, 1552, 1572, 15A2

2" x 10" Plates, Product Codes 1522, 1542, 1562, 1582, 15B2

Non-Keyed, Euro Profile Style Thumbturn Inside (for Active Door)

1 1/2" x 11" Plates, Product Codes 1513, 1533, 1553, 1573, 15A3 2" x 10" Plates, Product Codes 1523, 1543, 1563, 1583, 15B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1514, 1534, 1554, 1574, 15A4

2" x 10" Plates, Product Codes 1524, 1544, 1564, 1584, 15B4

Dummy Pair (for Non-Active Door)

1 1/2" x 11" Plates, Product Codes 1515, 1535, 1555, 1575, 15A5 2" x 10" Plates, Product Codes 1525, 1545, 1565, 1585, 15B5

American Cylinder Hub Below Handle 35⁄8" Center-to-Center

ref. Milgard®, Pella®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

BRASS PLATES, CONCORD STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 8 for	Polished Brass - Lifetime (US3)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1671	Brass & Modern Brass Lever Options.	French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15)
Non-Keyed Passage	1672		Pewter (US15A)
Non-Keyed American Style Thumbturn Inside	1673		Flat Black (US19)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1674		Polished Chrome (US26) Unlacquered Brass (US3NL)*
Dummy Pair	1675
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1681
Non-Keyed Passage	1682	*Unlacquered Brass (US3NL)
Non-Keyed American Style Thumbturn Inside	1683	*Unlacquered Brass (US3NL)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1684		finish available for a $40 List Price upcharge per item.
Dummy Pair	1685		finish available for a $40 List Price upcharge per item.

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

BRASS PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11/2" x 11" Plates		See Page 8 for Brass & Modern	Satin Brass (US4)	$203.00
Keyed with American Cylinder	16A1	Brass & Modern Brass Lever	Oil Rubbed Bronze (US10B) Polished Nickel - Lifetime (US14)
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)		Options.	Satin Nickel (US15)
Non-Keyed Passage	16A2		Flat Black (US19)
Non-Keyed American Style Thumbturn Inside	16A3		Polished Chrome (US26) Unlacquered Brass (US3NL)*
Non-Keyed Fixed Handle Outside, Operating Handle Inside	16A4
Dummy Pair	16A5
Sets with 2" x 10" Plates
Keyed with American Cylinder	16 B 1
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage	16 B 2	-
Non-Keyed American Style Thumbturn Inside	16 B 3	-	*Unlacquered Brass (US3NL)
Non-Keyed Fixed Handle Outside, Operating Handle Inside	16 B 4 16 B 5		finish available for a $40 List Price
Dummy Pair	16 B 4 16 B 5		upcharge per item.

STAINLESS STEEL PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 1½" x 11" Plates		See Page 9 for	Stainless Steel (SS)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	16A1	Stainless Steel Lever Options.
Non-Keyed Passage	16A2
Non-Keyed American Style Thumbturn Inside	16A3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	16A4
Dummy Pair	16A5	1
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	16 B 1
Non-Keyed Passage	16 B 2
Non-Keyed American Style Thumbturn Inside	16 B 3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	16 B 4
Dummy Pair	16 B 5

Handing Required

Key codes may be specified. Fits standard door thickness of 1¾". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
$\bullet \ \ \text{No upcharge for cylinder substitution. Can be keyed into existing Weiser} \\ ^{\circ} \ \text{system}.$

American Cylinder Hub Below Handle 35⁄8" Center-to-Center

ref. Milgard®, Pella®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

SANDCAST BRONZE PLATES, ARCHED STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder	1611	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage	1612
Non-Keyed American Style Thumbturn Inside	1613
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1614
Dummy Pair	1615
Sets with 2" x 10" Plates
Keyed with American Cylinder	1621
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage	1622
Non-Keyed American Style Thumbturn Inside	1623
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1624
Dummy Pair	1625

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

SANDCAST BRONZE PLATES, RECTANGULAR STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1651	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1652
Non-Keyed American Style Thumbturn Inside	1653
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1654
Dummy Pair	1655
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1661
Non-Keyed Passage	1662
Non-Keyed American Style Thumbturn Inside	1663
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1664
Dummy Pair	1665

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for Lost	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder	1631	Wax Cast Bronze Lever Options.	Medium Bronze (MB)
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage	1632
Non-Keyed American Style Thumbturn Inside	1633
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1634
Dummy Pair	1635
Sets with 2" x 10" Plates
Keyed with American Cylinder	1641
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage	1642
Non-Keyed American Style Thumbturn Inside	1643
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1644
Dummy Pair	1645

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

Door Configuration #6 American Cylinder Below Handle 3 5/8" Center-to-Center

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside

Standard Door Thickness: from 15/8" to 2"

Standard Components:

Single Cylinder Tailpiece
3 3/4" Steel Spindle
2" Rosette Screws
1 1/2" Rosette Screws for 1 5/8" thick door

Extended Door Thickness: Over 2" to 23/4"

Extended Components:

Long Single Cylinder Tailpiece
4 1/2" Steel Spindle
2 1/2" Rosette Screws
2" Rosette Screws for 2" 2 1/8" thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)

Standard Door Thickness: from 15/8" to 2"

Standard Components:

Thumbturn Tailpiece
3 3/4" Steel Spindle (half-spindle for fixed handle out/operating handle in)
2" Rosette Screws
1 1/2" Rosette Screws for 1 5/8" thick door

Extended Door Thickness: Over 2" to 23/4"

Extended Components:

Long Thumbturn Tailpiece
4 1/2" Steel Spindle (half-spindle for fixed handle out/operating handle in)
2 1/2" Rosette Screws
2" Rosette Screws for 2" 2 1/8" thick door

CONSTRUCTION KEYING

Lost ball system.
Last four pin locations drilled for lost ball application.
Master key pins used for code variability.
Construction keys and owner keys sent separately.
Order by indicating " Construction Keyed, House # _" next to applicable locks.

- Construction devices used on one or more of last four positions.

- Dimples drilled in plug in this position.

Charge for Construction Keying - $3.00 (NET)

• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder

• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code

• Order by indicating "Key Code XXXXX " next to applicable locks.

Keying Alike

Order by indicating "Keyed Alike" next to applicable locks if only one keyed alike group is wanted.
If ordering multiple groups (houses) indicate " Keyed Alike House #_ " next to applicable locks.

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Milgard®, Pella®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)

1 1/2" x 11" Plates, Product Codes 1611, 1631, 1651, 1671, 16A1

2" x 10" Plates, Product Codes 1621, 1641, 1661, 1681, 16B1

Non-Keyed, Passage (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1612, 1632, 1652, 1672, 16A2

2" x 10" Plates, Product Codes 1622, 1642, 1662, 1682, 16B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)

1 1/2" x 11" Plates, Product Codes 1613, 1633, 1653, 1673, 16A3 2" x 10" Plates, Product Codes 1623, 1643, 1663, 1683, 16B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1614, 1634, 1654, 1674, 16A4

2" x 10" Plates, Product Codes 1624, 1644, 1664, 1684, 16B4

Dummy Pair (for Non-Active Door)

1 1/2" x 11" Plates, Product Codes 1615, 1635, 1655, 1675, 16A5 2" x 10" Plates, Product Codes 1625, 1645, 1665, 1685, 16B5

American Cylinder Hub Above Handle 6" Center-to-Center

ref. Trillenium® (formerly W&F Manufacturing)

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

BRASS PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 2" x 10" Plates	17 B 1	See Page 8 for Brass & Modern	Satin Brass (US4) Oil Rubbed Bronze (US10B)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	17 B 1	Brass Lever Options.	Polished Nickel - Lifetime (US14) Satin Nickel (US15) Flat Black (US19) Polished Chrome (US26) Unlacquered Brass (US3NL)*
Non-Keyed American Style T-Turn Inside (Patio Function)	17 B 3
Dummy Pair	17 B 5	_
Non-Keyed American Style T-Turn Inside, Fixed Handles	17 B 6
			*IIl /II.C.N.I.)
			*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.

Handing Required

Key codes may be specified. Fits standard door thickness of 1¾". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

STAINLESS STEEL PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 2" x 10" Plates		See Page 9 for	Stainless Steel (SS)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	17 B 1	Stainless Steel Lever Options.
Non-Keyed American Style T-Turn Inside (Patio Function)	17 B 3
Dummy Pair	17 B 5
Non-Keyed American Style T-Turn Inside, Fixed Handles	17 B 6

SANDCAST BRONZE PLATES, RECTANGULAR STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 2" x 10" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1761	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed American Style T-Turn Inside (Patio Function)	1763
Dummy Pair	1765
Non-Keyed American Style T-Turn Inside, Fixed Handles	1766

SANDCAST BRONZE PLATES, ARCHED STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 2" x 10" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1721	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed American Style T-Turn Inside (Patio Function)	1723
Dummy Pair	1725
Non-Keyed American Style T-Turn Inside, Fixed Handles	1726

emtek.com 800.356.2741 59

American Cylinder Hub Above Handle 6" Center-to-Center

ref. Trillenium® (formerly W&F Manufacturing)

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 2" x 10" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1741	Bronze Lever Options.
Non-Keyed American Style T-Turn Inside (Patio Function)	1743
Dummy Pair	1745
Non-Keyed American Style T-Turn Inside, Fixed Handles	1746

Handing Required

Key codes may be specified. Fits standard door thickness of 1¾". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

Door Configuration #7 American Cylinder Above Handle 6" Center-to-Center

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside

Standard Door Thickness: from 15/8" to 2"

Standard Components:

Single Cylinder Tailpiece
2" Steel Spindles (Half-spindle)
2" Rosette Screws for 1 5/8" 1 3/4" thick door
2 1/2" Rosette Screws for 1 3/4" 2" thick door

Extended Door Thickness: Over 2" to 23/4"

Extended Components:

Long Single Cylinder Tailpiece
2" Steel Spindles (Half-spindle)
2 1/2" Rosette Screws 2" 2 1/4" think door
3" Rosette Screws for 2 1/4" 2 3/4" thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only)

Standard Door Thickness: from 15/8" to 2"

Standard Components:

Thumbturn Tailpiece
2" Steel Spindles (Half-spindle. No spindle for fixed handles)
2" Rosette Screws for 1 5/8" 1 3/4" thick door
2 1/2" Rosette Screws for 1 3/4" 2" thick door

Extended Door Thickness: Over 2" to 23/4"

Extended Components:

Long Thumbturn Tailpiece
2" Steel Spindles (Half-spindle. No spindle for fixed handles)
2 1/2" Rosette Screws 2" 2 1/4" think door
3" Rosette Screws for 2 1/4" 2 3/4" thick door

CONSTRUCTION KEYING

Lost ball system.
Last four pin locations drilled for lost ball application.
Master key pins used for code variability.
Construction keys and owner keys sent separately.
Order by indicating " Construction Keyed, House # _" next to applicable locks.

- Construction devices used on one or more of last four positions.

- Dimples drilled in plug in this position.

Charge for Construction Keying - $3.00 (NET)

• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder

• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code

• Order by indicating "Key Code XXXXX " next to applicable locks.

Keying Alike

Order by indicating "Keyed Alike" next to applicable locks if only one keyed alike group is wanted.
If ordering multiple groups (houses) indicate " Keyed Alike House #_ " next to applicable locks.

DOOR CONFIGURATION #7 Specification Sheet for Components and Door Thickness

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Trillenium® (formerly W&F Manufacturing)

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)

2" x 10" Plates, Product Codes 1721, 1741,1761, 17B1

Non-Keyed, American Style T-Turn Inside (Active Door)

2" x 10" Plates, Product Codes 1723, 1743, 1763, 17B3

Dummy Pair (for Non-Active Door)

2" x 10" Plates, Product Codes 1725, 1745, 1765, 17B5

Non-Keyed, Fixed Handles, American Style T-Turn Inside (for Semi-Active Door)

2" x 10" Plates, Product Codes 1726, 1746, 1766, 17B6

American Cylinder Hub Above Handle 51/4" Center to Center

ref. Neuma Doors®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

STAINLESS STEEL PLATES, MODERN STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
METRIC KNOB Sets with 11⁄2" x 11" Plates		See Page 9 for	Stainless Steel (SS)	$203.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	18A1	Stainless Steel Lever Options.
Non-Keyed Passage	18A2
Non-Keyed American Style Thumbturn Inside	18A3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	18A4
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	18B1
Non-Keyed Passage	18B2
Non-Keyed American Style Thumbturn Inside	18B3
Non-Keyed Fixed Handle Outside, Operating Handle Inside	18B4

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

American Cylinder Hub Above Handle 51/4" Center to Center

ref. Neuma Doors®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

SANDCAST BRONZE PLATES, RECTANGULAR STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1851	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1852
Non-Keyed American Style Thumbturn Inside	1853
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1854

Sets with 2" x 10" Plates
Keyed with American Cylinder	1861
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage	1862
Non-Keyed American Style Thumbturn Inside	1863
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1864

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

SANDCAST BRONZE PLATES, ARCHED STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1811	Sandcast Bronze Lever Options.	Medium Bronze (MB) Tumbled White Bronze (TWB)
Non-Keyed Passage	1812
Non-Keyed American Style Thumbturn Inside	1813
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1814
Sets with 2" x 10" Plates
Keyed with American Cylinder	1821
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage	1822
Non-Keyed American Style Thumbturn Inside	1823
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1824

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE	Product Code	Lever Style (LH/RH)	Finish	List Price
Sets with 11⁄2" x 11" Plates		See Page 9 for Lost	Flat Black Bronze (FB)	$226.00
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1831	Wax Cast Bronze Lever Options.	Medium Bronze (MB)
Non-Keyed Passage	1832
Non-Keyed American Style Thumbturn Inside	1833
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1834
Sets with 2" x 10" Plates
Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)	1841
Non-Keyed Passage	1842
Non-Keyed American Style Thumbturn Inside	1843
Non-Keyed Fixed Handle Outside, Operating Handle Inside	1844

Handing Required

Key codes may be specified. Fits standard door thickness of 13⁄4". Specify if thicker.
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway

Specify by adding "W" to the beginning of Product Code.
No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

Door Configuration #8 American Cylinder Above Handle 5 1/4" Center to Center

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside

Standard Door Thickness: 13/4"

Standard Components:

Single Cylinder Tailpiece
3 3/4" Steel Spindle
1 1/2" Rosette Screws

Standard Door Thickness: 13/4"

Standard Components:

Thumbturn Tailpiece
3 3/4" Steel Spindle (half-spindle for fixed handle out/operating handle in)
1 1/2" Rosette Screws

CONSTRUCTION KEYING

Lost ball system.
Last four pin locations drilled for lost ball application.
Master key pins used for code variability.
Construction keys and owner keys sent separately.
Order by indicating " Construction Keyed, House # _" next to applicable locks.

Dimples drilled in plug in this position.

Charge for Construction Keying - $3.00 (NET)

• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder

• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code

• Order by indicating "Key Code XXXXX " next to applicable locks.

Keying Alike

Order by indicating "Keyed Alike" next to applicable locks if only one keyed alike group is wanted.
If ordering multiple groups (houses) indicate " Keyed Alike House # _" next to applicable locks.

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Neuma Doors®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)

1 1/2" x 11" Plates, Product Codes 1811, 1831, 1851, 18A1 2" x 10" Plates, Product Codes 1821, 1841, 1861, 18B1

Non-Keyed, Passage (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1812, 1832, 1852, 18A2 2" x 10" Plates, Product Codes 1822, 1842, 1862, 18B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)

1 1/2" x 11" Plates, Product Codes 1813, 1833, 1853, 18A3 2" x 10" Plates, Product Codes 1823, 1843, 1863, 18B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

1 1/2" x 11" Plates, Product Codes 1814, 1834, 1854, 18A4 2" x 10" Plates, Product Codes 1824, 1844, 1864, 18B4

PRODUCT INDEX

PRODUCT CODE	PAGE	PRODUCT CODE	PAGE	PRODUCT CODE	PAGE	PRODUCT CODE	PAGE	PRODUCT	PAGE	PRODUCT CODE	PAGE
1111	24	1253	31	: 1415	42	1562	49	: 1761	59	: 14A5	41
1112	24	1254	31	1421	42	1563	49	1763	59	14B1	41
1113	24	1255	31	1422	42	1564	49	1765	59	14B2	41

1114	24	1261	31	1423	42	1565	49	1766	59	14B3	41
1115	24	1262	31	1424	42	1571	46	1811	65	14B4	41
1121	24	1263	31	1425	42	1572	46	1812	65	14B5	41
1122	24	1264	31	1431	43	1573	46	1813	65	15A1	47
1123	24	1265	31	1432	43	1574	46	: 1814	65	: 15A2	47
1124	24	: 1271	28	1433	43	: 1575	46	: 1821	65	: 15A3	47
1125	24	: 1272	28	1434	43	1581	46	1822	65	: 15A4	47
1131	25	1273	28	1435	43	1582	46	1823	65	15A5	47
1132	25	1274	28	1441	43	1583	46	1824	65	15B1	47
1133	25	1275	28	1442	43	1584	46	1831	65	15B2	47
1134	25	1281	28	1443	43	1585	46	1832	65	15B3	47
1135	25	1282	28	1444	43	1611	54	1833	65	15B3	47

1141	25	1283	28	1445	43	1612	54	1834	65	15B5	47
1142	25	1284	28	1451	43	1613	54	1841	65	16A1	53
1143	25	1285	28	1452	43	1614	54	1842	65	16A2	53
1144	25	1311	36	1453	43	1615	54	1843	65	16A3	53
1145	25	1312	36	1454	43	1621	54	1844	65	16A4	53
1151	25	1313	36	1455	43	1622	54	: 1851	64	: 16A5	53
1152	25	: 1314	36	1461	43	1623	54	1852	64	: 16B1	53
1153	25	1315	36	1462	43	1624	54	1853	64	16B2	53
1154	25	1321	36	1463	43	1625	54	1854	64	16B3	53
1155	25	1322	36	1464	43	1631	55	1861	64	16B4	53
1161	25	1323	36	1465	43	1632	55	1862	64	16B5	53
	25	1323	36	1471	40	1633	55 55	1863		17B1
1162									64		58,59
1163	25	1325	36	1472	40	1634	55	1864	64	17B3	58,59
1164	25	1331	37	1473	40	1635	55	11A1	23	17B5	58,59
1165	25	1332	37	1474	40	1641	55	11A2	23	17B6	58,59
1171	22	1333	37	1475	40	1642	55	: 11A3	23	: 18A1	63
1172	22	1334	37	1481	40	1643	55	11A4	23	18A2	63
1173	22	1335	37	1482	40	1644	55	11A5	23	18A3	63
1174	22	: 1341	37	1483	40	1645	55	: 11B1	23	: 18A4	63
1175	22	: 1342	37	1484	40	1651	55	: 11B2	23	: 18B1	63
1181	22	1343	37	1485	40	1652	55	11B3	23	18B2	63
1182	22	1344	37	1511	48	1653	55	11B4	23	18B3	63
1183	22	1345	37	1512	48	1654	55	11B5	23	18B4	63
1184	22	1351	37	1512	48	1655	55	12A1	29	1LA1	16
		1351				1661		12A1		1LA1
1185	22		37	1514	48		55		29		16
1211	30	1353	37	1515	48	1662	55	12A3	29	1LA3	16
1212	30	1354	37	1521	48	1663	55	12A4	29	1LA4	16
1213	30	1355	37	1522	48	1664	55	12A5	29	1LM1	15
1214	30	1361	37	1523	48	1665	55	12B1	29	1LM2	15
1215	30	1362	37	1524	48	1671	52	12B2	29	1LM3	15
1221	30	1363	37	1525	48	1672	52	12B3	29	: 1LM4	15
1222	30	: 1364	37	1531	49	: 1673	52	: 12B4	29	1LR1	14
1223	30	1365	37	1532	49	1674	52	12B5	29	1LR2	14
1224	30	1371	34	1533	49	1675	52	13A1	35	1LR3	14
1225	30	1372	34	1534	49	1681	52	13A2	35	1LR4	14
1231	31	1372	34	1535	49	1682	52	13A3	35	2LA1	20
•
1232	31	1374	34	1541	49	1683	52	13A4	35	2LA2	20
1233	31	1375	34	1542	49	1684	52	13A5	35	2LM1	19
1234	31	1381	34	1543	49	1685	52	13B1	35	2LM2	19
1235	31	1382	34	1544	49	1721	59	13B2	35	2LR1	18
1241	31	1383	34	1545	49	1723	59	13B3	35	2LR2	18
1242	31	1384	34	1551	49	1725	59	13B4	35
1243	31	1385	34	1552	49	1726	59	13B5	35	•
1244	31	1411	42	1553	49	1741	60	14A1	41
1245	31	1412	42	1554	49	1743	60	14A2	41	*
1251	31	1413	42	1555	49	1745	60	14A3	41	•
1252	31	1414	42	1561	49	1746	60	14A4	41	•
	J.		12	: ::	10	1770	00	·		*

G-U® is a registered trademark of G-U Hardware, Inc. Paddock™ is a registered trademark of Yale® UK. Pella® is a registered trademark of Pella Corporation. Sierra Pacific Windows® is a registered trademark of Sierra Pacific Industries. Superior® is a registered trademark of Superior Engineered Products Corporation. Willmar® is a registered trademark of JELD-WEN of Canada Ltd. Andersen® is a registered trademark of Andersen Corporation. Trillenium® is a registered trademark of Endura Products, Inc. Eagle® is a registered trademark of Eagle Window and Door, Inc, BiltBest® is a registered trademark of BiltBest Windows and Patio Doors. Ashland® is a registered trademark of Ashland Products, Inc. Caradco®, JELD-WEN, Norco® and Pozzi® are registered trademarks of JELD-WEN Inc., Oregon, USA. Integrity® and Marvin® are registered trademarks of Marvin Windows and Doors. Milgard® is a registered trademark of Milgard Windows, Inc. Therma-Tru® is a registered trademark of Therma-Tru Doors®. HOPPE® is a registered trademark of HOPPE North America, Inc. Hurd® is a registered trademark of Hurd Millwork Company. Kolbe & Kolbe® is a registered trademark of Kolbe & Kolbe Millwork Company, Inc. Lincoln® is a registered trademark of Lincoln Wood Products, Inc. Loewen® is a registered trademark of Loewen Windows. PGT® is a registered trademark of PGT Industries. Peachtree® and Vetter® are registered trademark of The Peachtree Companies, Inc. Semco® is a registered trademark of Semling-Menke Co. Inc. Weathershield® is a registered trademark of Weathershield Mfg. Inc. KML by Andersen® is a registered trademark of KML by Andersen. Atrium® is a registered trademark of Atrium. KFV® is a registered trademark of KFV. Simpson® is a registered trademark of Simpson. Signature® is a registered trademark of Signature. Crestline® is a registered trademark of Crestline. Windsor® is a registered trademark of Windsor. Neuma Doors® is a registered trademark of Nan Ya Plastics Corporation. With the exception of Paddock™, none of the aforementioned companies are affiliated with Emtek Products, Inc.

Multi Point Lock Trim Order Form	Acct#
Order Placed By	Date
Billing Information	Shipping Address
Company Name	Company Name
Address	Address
City State, Zip	City State, Zip
Telephone	Telephone
PO#	Note

QTY	Configuration	Product Code	Lever Style	Handing (LH/RH)	Finish	Price

EMTEK Products, Inc.

www.emtek.com

15250 E Staord Street City of Industry, CA 91744 Tel: 800-356-2741 626-961-0413 Fax: 800-577-5771 626-336-2812

Please Fax Order Form to (800) 577-5771 or Email to orders@emtek.com

LIFETIME LIMITED WARRANTY

Subject to the terms and conditions of this warranty, Emtek Products, Inc. ("Company") extends a lifetime limited warranty* to the original consumer user ("Original User") of our product ("Product") against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed.

*Electronic components warranted TWO (2) YEARS

This warranty only applies to the Original User of the Products. This warranty is not transferable. This warranty applies to all products sold on or after April 2, 2012.

Original User: The Original User will return the defective Product to the retailer from whom it was purchased, accompanied by a statement of defects and proof of purchase.

What Emtek will do: Upon return of the defective Product to Emtek for inspection, free and clear of all liens and encumbrances and accompanied by the statement of defects and proof of purchase, Emtek's sole obligation, at its option, is to either repair or replace the Product, or refund the original retailer purchase price in exchange for the Product.

THE COMPANY MAKES NO OTHER WARRANTY OTHER THAN AS EXPRESSLY STATED HEREIN, AND ALL IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED.

THE COMPANY'S MAXIMUM LIABILITY HEREUNDER IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL OR SPECIAL AND/OR PUNITIVE DAMAGES OF ANY NATURE ARISING FROM THE SALE OR USE OF THE PRODUCT, WHETHER BASED ON CONTRACT, WARRANTY, TORT, STRICT LIABILITY, PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights and a buyer may also have other rights which may vary from state to state.

WHAT IS NOT COVERED: THE FOLLOWING COSTS, EXPENSES AND DAMAGES ARE NOT COVERED BY THE PROVISIONS OF THIS LIMITED WARRANTY: (I) LABOR COSTS INCLUDING, BUT NOT LIMITED TO, SUCH COSTS AS THE REMOVAL AND RE-INSTALLATION OF PRODUCT; AND (II) SHIPPING AND FREIGHT EXPENSES REQUIRED TO RETURN PRODUCT TO EMTEK.

THE PROVISIONS OF THIS WARRANTY DO NOT APPLY TO PRODUCTS: (I) USED IN COMMERCIAL APPLICATIONS; (II) USED IN COMMON AREA APPLICATIONS; (III) USED FOR PURPOSES FOR WHICH THEY ARE NOT DESIGNED OR INTENDED; (IV) WHICH HAVE BEEN SUBJECTED TO ALTERATION, ABUSE, MISUSE, NEGLIGENCE OR ACCIDENT; (V) WHICH HAVE BEEN IMPROPERLY STORED, INSTALLED, MAINTAINED OR OPERATED; (VI) WHICH HAVE BEEN USED IN VIOLATION OF WRITTEN INSTRUCTIONS PROVIDED BY EMTEK; (VII) WHICH HAVE BEEN SUBJECTED TO IMPROPER TEMPERATURE, HUMIDITY OR OTHER ENVIRONMENTAL CONDITIONS; OR (VIII) WHICH, BASED ON EMTEK'S EXAMINATION, DO NOT DISCLOSE TO EMTEK'S SATISFACTION NON-CONFORMANCE TO THE WARRANTY. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals.

Finish Warranty: Polished Brass-Lifetime and Polished Nickel-Lifetime finishes carry a lifetime limited finish warranty. There is no finish warranty on Deep Burgundy, Flat Black Patina, Medium Bronze Patina, Polished White Bronze, Rust, Silver Patina, Tumbled White Bronze, and Unlacquered Brass finishes. All other finishes carry a five year finish warranty.

Warranty claims: Please contact the retailer from whom the defective product was purchased. If assistance is needed, please contact Emtek Customer Service at:

EMTEK Products, Inc. 15250 E. Stafford Street City of Industry, CA 91744 Tel: (626) 961-0413

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience

EMTEK Products, Inc. 15250 E. Stafford Street City of Industry • CA 91744 Tel: 800-356-2741 • 626-961-0413 Fax: 800-577-5771 • 626-336-2812 emtek.com

2019_Emtek_Multi_Point_LowRes_(2)

PAGE

Large Multi Point Entry Sets 14

Large Multi Point Entry Sets 18

EMTEK MULTI POINT LOCK TRIM FOR SWINGING DOORS

To determine your Multi-Point Lock configuration:

ORDERING AND RETURNS

Placing Orders

Hours of Operation

Minimum Order Requirements

Payment Terms

Payment Options

Sales Tax

Prices

Returns

SHIPPING AND FREIGHT

Shipping Costs

Shipping Options

Order Lead time

DEALER INFORMATION PORTAL

Online Account Access

NO CHARGE SAMPLE PROGRAM

Sample Program

Sample Order Exceptions

Placing a Sample Order

No Restocking Fee Charged for Sample Orders with Exceptions

NO CHARGE DISPLAY PROGRAM

Display Program

Placing a Display Order

Product for use on Displays in your Showroom

Minimum Advertised Price Policy Effective February 6, 2017

SELECT BRASS

MODERN BRASS

SOLID BRASS

ARTS & CRAFTS BRASS

SANDCAST BRONZE

LOST WAX CAST BRONZE

STAINLESS STEEL

HANDING OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE

SELECT BRASS

MODERN BRASS

SOLID BRASS

SANDCAST BRONZE

LOST WAX CAST BRONZE

STAINLESS STEEL

Sandcast Bronze Levers

Lost Wax Cast Bronze Levers

Stainless Steel Levers

LARGE MULTI POINT ENTRY SETS

Handing Required

Ref. G-U® LARGE MULTI POINT ENTRY SETS

Handing Required

Weiser®(WR5) Keyway

LARGE MULTI POINT ENTRY SETS

Handing Required

Keyed Plates with American Cylinder

Standard Door Thickness: from 15/8" to 2"

Extended Door Thickness: Over 2" to 23/4"

Dummy Plates

Standard Door Thickness: from 15/8" to 2"

Extended Door Thickness: Over 2" to 23/4"

CONSTRUCTION KEYING

Charge for Construction Keying - $3.00 (NET)

Charge for Re-Keying - $2.00 (NET) per Cylinder

Keying to Code

Keying Alike

LARGE MULTI POINT ENTRY SETS

Handing Required

Ref. G-U® LARGE MULTI POINT ENTRY SETS

Handing Required

LARGE MULTI POINT ENTRY SETS

Handing Required

Specification Sheet for Trim and Cylinder Styles LARGE MULTI POINT ENTRY SETS

Keyed Plates with Euro Profile Cylinder

Standard Door Thickness: from 15/8" to 2" Extended Door Thickness: Over 2" to 21/2" Extended Door Thickness: Over 21/2"to 23/4"

Dummy Plates

Standard Door Thickness: from 15/8" to 2" Extended Door Thickness: Over 2" to 23/4"

CUSTOM KEYING

Charge for Re-Keying - $2.00 (NET) per Cylinder

Keying to Code