SECTIONAL LEVER AND BALL KNOB TRIM

TEMPLATE: W53512 REV. 11 04-24-2019

MORTISE FUNCTIONS

MR117 MR135 MR136 MR141 MR149 MR154 MR162 MR181 MR213

INSIDE OF RIGHT HAND DOOR DOOR EDGE OUTSIDE OF RIGHT HAND DOOR SEE NOTE 6 BACKSET AT DOOR EDGE CENTER LINE 2X Ø7/64 HOLLOW METAL DOOR STRIKE Q 2X Ø WOOD/SOLID CORE DOOR LOCK LEVER OR KNOB HEIGHT ABOVE FINISHED FLOOR 2X #12-24 2X #12-24 COMBO SCREW COMBO SCREW NOTES: 1. ANSI STANDARD MR SERIES MORTISE LOCKS ARE INSTALLED FOLLOWING THE DOOR AND FRAME REQUIREMENTS FOUND IN ANSI/BHMA A156.13-2002.

2. DOORS:

REINFORCEMENT IS REQUIRED PER ANSI A115.1-1991.

3. DOOR THICKNESS:

STANDARD DOOR THICKNESS IS 1- $\backslash frac\{1\}\{4\}$ ". CONSULT FACTORY FOR OTHER DOOR SIZES.

4. LEAD LINING:

ADD $\backslash mbox\{\backslash ensuremath\{\backslash \%\}\}"$ TO MORTISE WIDTH WHEN PREPARING DOOR FOR A LEAD LINED MR SERIES MORTISE LOCK BODY.

5. SILENCERS AND WEATHER STRIPPING: PROVISIONS MUST BE MADE TO ALLOW PROPER DOOR CLOSURE WHEN USING DOOR SILENCERS, WEATHER STRIPPING OR SOUND PROOFING.

6. DIMENSIONS FOR STRIKE ARE NOT APPLICABLE FOR THE ELECTRIC STRIKE. SEE ELECTRIC STRIKE MANUFACTURERS TEMPLATE FOR DETAILS.

MINIMUM