w53510 Rev5 MR113, 115, 116, 139, 148, 199, 215

SECTIONAL LEVER AND BALL KNOB TRIM

TEMPLATE: W53510

REV. 5 5-29-2020

MORTISE FUNCTIONS

MR113 MR115 MR116 MR139 MR148 MR199 MR215

INSIDE OF RIGHT HAND DOOR DOOR EDGE OUTSIDE OF RIGHT HAND DOOR SEE NOTE 6 BACKSET AT DOOR EDGE CENTER LINE STRIKE $\backslash varphi$ -FRONT C LEVER OR KNOB HEIGHT | ABOVE FINISHED FLOOR 2X #12-24 COMBO SCREW COMBO SCREW 1. ANSI STANDARD MR SERIES MORTISE LOCKS ARE INSTALLED FOLLOWING THE DOOR AND FRAME REQUIREMENTS FOUND IN ANSI/BHMA A156.13-2002. MINIMUM

2. DOORS

REINFORCEMENT IS REQUIRED PER ANSI A115.1-1991.

3. DOOR THICKNESS:

STANDARD DOOR THICKNESS IS 1- $\backslash frac\{3\}\{4\}$ ". CONSULT FACTORY FOR OTHER DOOR SIZES.

4. LEAD LINING:

ADD $\backslash slash\_8^\{\backslash prime\backslash prime\}$ TO MORTISE WIDTH WHEN PREPARING DOOR FOR A LEAD LINED MR SERIES MORTISE LOCK BODY.

5. SILENCERS AND WEATHER STRIPPING: PROVISIONS MUST BE MADE TO ALLOW PROPER DOOR CLOSURE WHEN USING DOOR SILENCERS, WEATHER STRIPPING OR SOUND PROOFING.

6. DIMENSIONS FOR STRIKE ARE NOT APPLICABLE FOR THE ELECTRIC STRIKE. SEE ELECTRIC STRIKE MANUFACTURERS TEMPLATE FOR DETAILS.