w53502 Rev8 MR117, 135, 136, 141, 154, 162, 181

ESCUTCHEON LEVER AND BALL KNOB TRIM

TEMPLATE: W53502 REV. 8 04-12-2019

MORTISE FUNCTIONS

MR117 MR135 MR136 MR141

MR149 MR154 MR162 MR181 MR213

INSIDE OF RIGHT HAND DOOR DOOR EDGE OUTSIDE OF RIGHT HAND DOOR SEE NOTE 6 BACKSET AT DOOR -2X Ø EDGE CENTER LINE STRIKE G LOCK FRONT LEVER OR KNOB HEIGHT ABOVE FINISHED FLOOR 2X #12-24 2X #12-24 COMBO SCREW COMBO SCREW 1. ANSI STANDARD MR SERIES MORTISE LOCKS ARE INSTALLED FOLLOWING THE DOOR AND FRAME REQUIREMENTS FOUND IN 2. DOORS: MINIMUM REINFORCEMENT IS REQUIRED PER ANSI A115.1-1991.

3 DOOR THICKNESS:

STANDARD DOOR THICKNESS IS 1-3/4 ". CONSULT FACTORY FOR OTHER DOOR SIZES.

4. LEAD LINING:

ADD %" TO MORTISE WIDTH WHEN PREPARING DOOR FOR A LEAD LINED MR SERIES MORTISE LOCK BODY.

5. SILENCERS AND WEATHER STRIPPING: PROVISIONS MUST BE MADE TO ALLOW PROPER DOOR CLOSURE WHEN USING DOOR SILENCERS. WEATHER STRIPPING OR SOUND PROOFING.

6. DIMENSIONS FOR STRIKE ARE NOT APPLICABLE FOR THE ELECTRIC STRIKE. SEE ELECTRIC STRIKE MANUFACTURERS TEMPLATE FOR DETAILS.