DEVICE APPLICATION 5CHEDULE
INSTALLATION	MIN. STILE	BACKSET
TWO VERT. ROD DEVICES	3 11/16"	2 3/16"
VERT. ROD & MORTISE DEVICE	SEE TEMP. 10305	2 3/4"
SINGLE DOOR	3 [1/16"	2 3/16"

APPL1CATION	PREPARAT]ON
SURFACE APPLICATION	#10-24 TAP-4 PLACE5
990 TRIM APPLICATION SEX BOLT APPLICATION (SEE NOTE 1)	1/4" DIA. THIS SIDE 13/32" DIA. OPPOSITE 5IDE - 4 PLACES

NOTES:

• 1. THESE FOUR HOLES TO BE PREPARED FOR SURFACE APPLICATION WHEN USING 696/697 TRIM. DO NOT PREPARE FOR SEX BOLTS.
• 2. FOR STOCK HOLLOW METAL DOORS SEE TEMPLATE NO. 10310.
• 3. LATCH CASE PREPARATION TO BE MADE AT INSTALLATION ON DOOR.
• 4. IT [S RECOMMENDED THE MOUNTING HOLES BE PREPARED IN THE FIELD.
• 5. FOR OUTSIDE TRIM PREPARATION, WHEN REQUIRED, SEE TRIM TEMPLATE.
• 6. LHR APPLICATION SHOWN, RHR APPLICATION OPPOSITE.
• 7. BACKSET MAY VARY WHEN USED WITH COORDINATOR.
• 8. GLASS BEAD KIT AVAILABLE WHEN REQUIRED.

RECOMMENDED DOOR UNDERCUT [S 1/4" FROM FINISHED FLOOR IPANIC & FIRE) OR 1/8" FROM THRESHOLD IPANIC ONLY!.

2 3/4

CX9827/9927 EO & DT Series Vertical Rod Devices

VON DUPRIN ®

TEMPLATE NUMBER:

10356_a

DATE: 05-22-13