HAGER TEST REPORT NO.: LS10001
EVALUATION OF
Hager Companies 2500 Series Grade 2 Lever Lockset
TEST PARAMETERS:
This report covers tests and/or evaluations performed using the following standard(s) as a guideline: ANSI/BHMA A156.2-2003 American National Standard for Bored and Preassembled Locks & Latches. Testing was conducted by Intertek Testing Services NA, Inc., at their Middleton, WI facility.
DESCRIPTION OF TEST SAMPLES:
Samples were identified as Model 2500 Grade 2 Lever Cylindrical Lockset.
TEST DATES: 2/4/2010
RESULTS: COMPLIANT
The testing results of specific subsections are summarized below.
| Subsection | Test Description | Test Results |
|---|---|---|
| 9.1 | Operational Tests | Compliant |
| 9.2 | Strength Tests | Compliant |
| 9.3 | Qualification Requirements | Compliant |
| 9.4 | Cycle Tests | Compliant |
| 9.5 |
Performance after
Cycle Tests |
Compliant |
| 9.6 | Material Evaluation Tests | Compliant |
This report summary was prepared as an account of work performed by a Third-Party Nationally Recognized Testing Laboratory. The information included in this report is certified extracts from the original test records, as contained in the permanent records of Hager Companies, Inc. Copies of the original third-party test reports are available upon request.
Copyright © 2010 Hager Companies, Inc. Test Lab: Intertek Testing Services
Report Date: 2/4/2010 Third Part Test Report: 3198115MID-001