RESPONSIBILITY DOOR AND FRAME MANUFACTURERS ARE RESPONSIBLE FOR PROVIDING ADEQUATE CONSTRUCTION OR REINFORCEMENTS FOR PROPER INSTALLATION OF HARDWARE SHOWN. TH955 & TH959 Trim With ED5200, ED5400 or ED5800 Series TH955 TH959 OUTSIDE FACE OF DOOR Section X - X X 1/2 (13) Dia. Thru Door (5 Places) 1-3/8 (35) 3-5/8 (92) 3-5/8 (92) X 11/16 (17.5) 9-15/16 (252) CL CL 2-5/8 (67) 2-1/8 (54) 3/4 (19) Radius (Typical) 1/2 (13) Dia. Cutout 1-1/4 (32) Deep Vertical Reference (Trim Centerline) Inside Face Of Door 7/8 (22) 3/8 (9.5) Dia. 3/4 (19) Deep Horizontal Reference (Device Centerline) Notes: 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template. 2. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. Preparation is typical for both door hands. 5. Provide adequate structural support to maintain door integrity during operation. 6. Prepare mounting holes when installing trim. 7. Dimensions given about a centerline are symmetrical. 8. Unspecified radii 1/8 (3) maximum.

ALL ARCHITECTURAL BUILDERS HARDWARE MUST BE INSTALLED ON PROPERLY REINFORCED DOORS AND FRAMES, REGARDLESS OF TYPE, MATERIAL, OR METHOD OF CONSTRUCTION.

Wood or Composite Door Preparation Rim and Vertical Rod Exit Devices

DO NOT SCALE DRAWING SUPERSEDES TEMPLATE NUMBER SHEET DATE T31013 1 of 1 02/23 www.corbinrusswin.com