TH950 Trim Notes: 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template. 2. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. Preparation is typical for both door hands. 5. For door reinforcement see template T30800. 6. Prepare mounting holes when installing trim. 7. Provide adequate internal support to prevent door deformation from bolting trim to the device. OUTSIDE FACE OF DOOR Section X - X X 1-3/8 (35) 3-5/8 (92) 3-5/8 (92) X 11/16 (17.5) 9-15/16 (252) CL CL Horizontal Reference (Device Centerline) Vertical Reference (Trim Centerline) 1/2 (13) Dia. Outside Face 5/16 (8) Dia Inside Face (5 Places) Inside Face Of Door ® 7/8 (22) 3/8 (9.5) Dia. Outside Face TH950

Metal Door Preparation With ED5200, ED5400, ED5600 or ED5800 Series Rim, Mortise and Vertical Rod Exit Devices

DO NOT SCALE DRAWING SUPERSEDES TEMPLATE NUMBER DATE T31010 6-06 www.corbinrusswin.com