NOTES:

• THIS TEMPLATE INDICATES THE LOCATIONS FOR MOUNTING STRIKES WHEN GLASS BEAD SHIMS ARE USED TO RAISE EXIT DEVICES AND VERTICAL ROD LATCHES OFF THE SURFACE OF DOORS.
• REFER TO APPROPRIATE DEVICE TEMPLATE FOR ALL OTHER MOUNTING DIMENSIONS.
• 3. DIMENSIONS GIVEN IN INCHES AND (MM).

	TEMPLATE CROSS REFERENCE
①	DEVICE	DESCRIPTION	TEMPLATE
		ED8200 & ED8200B SERIES	T30436
	RIM	ED8200A SERIES	T30465
		ED9200 & ED9200B SERIES	T30441
		ED9200 & ED9200B SERIES x M61 & M62	T30490
		ED9200A SERIES	T30462
		ED8400 SERIES	T30437
	VERTICAL	ED8400A SERIES	T30467
	ROD	ED9400 SERIES	T30431
		ED9400A SERIES	T30443

RESPONSIBILITY

15/16 (23.8)

1-1/16 (27)

3

1-5/8 (41.3)

1-3/4 (44.5)

2-1/4 (57.2)

2-3/8 (60.3)

Door and Frame Manufacturers are responsible for providing adequate construction or reinforcements for proper installation of hardware shown. All architectural builders hardware must be installed on properly reinforced doors and frames, regardless of the type, material, or method of construction.

M 58 GLASS BEAD SHIM KIT

PUSHBAR RIM AND VERTICAL ROD EXIT DEVICES

1-9/16 (39.7)

1-11/16 (42.9)

1-1/8 (28.6)

1-7/8 (47.6)

2" (50.8)

DO NOT T30494 ВТН 04/05/93 NUMBER