FE6600 Series Multi-Point Lock
Frequently Asked Questions
What codes does the FE6600 Series device meet?
The FE6600 Series meets the following certifications: ICC 500 (2014), ANSI/BHMA A156.37 Grade 1, FEMA P-320 (2014), FEMA P-361 (2015), 3 hour UL-10C fire listing.
What functions are available?
Available in 12 mechanical functions, including electrified fail safe/fail secure.
What electified monitoring options are available with the FE6600 Series?
The FE6600 Series is available with Latchbolt Monitor (M91) and Deadbolt Monitor (M113).
Can you use access control with this device?
Yes. The FE6600 Series can be paired with the Corbin Russwin IN Series, SELP10, Access 600, or Access 700 access control products.
Is there a hold-back feature with the FE6600 Series?
Yes. The user can choose to operate the device with all three latch points or dog the top/bottom latches into "holdback" using the M188 dogging indicator. When the holdback feature is engaged, the FE6600 Series will operate as a standard mortise lock with latchbolt engagement only, and the top and bottom bolts retracted.
Are there indicator options to identify bolt engagement?
Yes. The M188 dogging indicator shows 1 or 3 point latch engagement.
Is there adjustability in the top and bottom bolts for the FE6600 Series?
Yes, the FE6600 Series has a unique feature where the top and bottom rods are adjusted from the center case, and can be adjusted after the door is hung.
What doors work with the FE6600 Series?
The FE6600 Series must be installed on StormPro® tornado resistant assemblies from Ceco Door and Curries. Concealed vertical assembly (rods, latches and cassette) will be preinstalled in the door.
What size and swings have been approved?
The FE6600 Series has been approved for installation on in-swing or out-swing single or pairs of doors. Doors sizes measure 3'0" x 7'0" up to 4'0" x 8'0" on single doors and on pairs of doors measure 6'0" x 7'0" up to 8'0" x 8'0".
What accessories will work with the FE6600 Series and comply with the necessary codes?
- • Door Closers: Sargent 281 Series, Corbin Russwin DC8000 Series, Norton 7500 Series, and Yale 4400 Series
- • Surface Bolts: Corbin Russwin 988CR
- • Accessories: Pemko S773 adhesive applied gasketing; Pemko 346 rain drip guard; Pemko 345 door bottom sweep; Pemko 2715 threshold; Pemko 305 astragal seal; Securitron CEPT Power Transfer; Securitron DPS-M door position switch
- • Hinges: McKinney StormPro® hinges
Does the FE6600 Series require a factory trained installer?
Yes. Corbin Russwin requires the FE6600 Series be installed by a factory trained installer. Factory training is available through ASSA ABLOY Americas University.
Is a device available for shutter applications?
Shutter applications will continue to use the FE6700 Series.
What is the warranty for the FE6600 Series?
The FE6600 Series is covered by a 7 year warranty.
Can you retrofit the FE6600 Series to an opening with the existing FE6800 Series?
No, the FE6600 Series requires a new frame, door, and floor prep.
Will we honor the warranty for the existing FE6800 Series devices?
Yes, all FE6800 Series devices are covered by a 7 year warranty. Replacement parts will be supported.
Corbin Russwin Architectural Hardware 225 Episcopal Road, Berlin, CT 06037 Phone 800-543-3658 Fax 800-447-6714 www.corbinrusswin.com
ASSA ABLOY Door Security Solutions Canada 160 Four Valley Drive, Vaughan, Ontario, Canada L4K 4T9 Phone: 800-461-3007 Fax: 905-738-2478 www.assaabloy.ca
Copyright © 2017, Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.