MOUNTING INFORMATION

- For Non-Fire Rated Exit Devices: Sex nuts or through bolts are recommended for wood core. wood and plastic covered composite doors, and any type of door without reinforcements.

TEMPLATE CROSS REFEREN	ICE
DESCRIPTION	TEMPLATE
C455, D455, E455 TRIMS C457, D457, E457 TRIMS	T30470
0355, 0356, 0357 TRIMS 0455, 0456, 0457 TRIMS	T30471

NOTES:

• BACKSET IS MEASURED FROM CENTERLINE OF BEVEL WHICH IS CENTERPOINT OF DOOR THICKNESS.
• END DOEDADATION OF TOTAL DECED TO SEDADATE

۷.	LUK LKCLAKATIUN	ᄪ	IKIM,	KELEK	111	2ELAKA IE
	TEMPLATE.

3. DIMENSIONS GIVEN IN INCHES AND (MM).

BEVEL

1/8 IN 2" (3.2) (50.8)

(177.8)

2-1/8

(54)

5/16 (7.9)3/16 MIN (4.8)(1) 436F03 136F03 SURFACE BOTTON STRIKE APPLICATION

EBOTTOM

AA

COVER SCREW

DTHERWISE

SPECIFIED

SUBJECT TO

THEMTSULGA

1-3/8

(34.9)

FINISHED

FLOOR

RESPONSIBILITY

Door and Frame Manufacturers are responsible for providing adequate construction or reinforcements for proper installation of hardware shown. All architectural builders hardware must be installed on properly reinforced doors and frames, regardless of the type, material, or method of construction

ED7400 SERIES

CROSSBAR NARROW STILE VERTICAL ROD DEVICE

910 TEMPLATE NUMBER T30472 1 - 98

ORILL FOR 1/4-20 TAPPING SCREW TYPE "F"

OR #14 WOOD SCREW (TO BE LOCATED WHEN

ATTACHING HARDWARE

TO DOOR)

A

INSIDE FACE OF DOOR

(DEVICE SIDE)