Corbin Russwin ED4200MA Narrow Stile Rim 650F308 Strike Metal Door and Frame or Mullion Template

Original Source Document Full PDF Version

Face

Doors

-1-1/2"

Mullion

Width

Mullion

Width

of Door

Notes: 1. Do not scale drawing. 2. Dimensions are in inches (mm). 3. LHR door shown. Preparation is typical for both door hands. Minimum door stile width: 3-1/2(89). See Note 10 Prepare mounting holes when installing the device. 1-1/4 Minimum 6. Unreinforced frames require blind rivet nuts (by others) to mount the strike. Dimension from door face. For recommended door reinforcements see template T30800. Unreinforced doors Strike Reinforcement require SNB option to mount the device components and strike interlock. (See Note 6) 9. Holes for optional SNB: 9/32 (7.00) dia. inside door face; 3/8 (9.50) dia. outside door face. 10. Provide door stiffeners as needed to prevent door collapse due to installation with Inside Face Of Door power tools, door use, or abuse. 11. Device mount to hinge stile (not shown) requires hole location and preparation Vertical Reference during device installation. 1-5/8 12. For outside trim preparation see appropriate trim template. Face of Stop (41)or Mullion 13. For electrical devices (suffixes M91, M92, M93, M94, M97) also see template T30890. 14. These holes MUST be field located using physical part as template, after Distance to 4 holes installation is complete and device is fully operational. determined in the field (Note 7) $\frac{5/8}{(16)}$ 10-24 Tap (See Note 14) 2-5/16 Typ. 5/8 (15.9) 3-5/8Dia.Thru 1-11/32 (92) (58.7)this face (34.1)Horizontal Reference 1<u>3/16</u> Typ. (Device & Strike Centerline) (20.6)1-11/32 (34.1)For Fire Rated 10-24 Tap Mullion Installations (2 Places) Only #10-24 Tap (Std.) or SNB Strike Preparation Details (4 Places) See Notes 9 & 14 MULLION FRAME 39-15/16 TEMPLATE SERIES SIZE ILLUSTRATION (1014)1/4-20 Tap (Std.) 1-1/2" x 3" T30882 700 Series (38 x 76) See Note 9 (SNB) -2 Places-T31074 900 Series 2" x 3" FE700 Series $(51 \times 76)$ T31075 WS700 Series CAUTION: Width of mullion used with exit device will affect device backset. Determine Mullion Series and Width Finished Floor before prepping doors for exit devices.

Supplied with 650F308 Strike Standard Application for Fire Labeled Metal Door and Frame or Mullion

assa abloy SUPERSEDES DO NOT SCALE DRAWING TEMPLATE NUMBER T31093 01-09