MOUNTING INFORMATION

Sex nuts or through bolts are required for wood and plastic covered composite doors, and any type of door without reinforcements and recommended for wood core and metal clad (Kalamein) type doors.

RH SHOWN LH OPPOSITE

Closer To Be Installed In A True Horizontal CAUTION: Position To Ensure Proper Closer Performance.

MOUNTING SCREW SPECIFICATIONS

M83 OFFSET BRACKET & QUIK-INSTALL™ BRACKET #12-14 self-drilling screw.

1/8 (3) diameter pilot hole required for Wood Applications.

Sex nuts, furnished when ordered

3/4 REF.

NOTES:

• 1. Dimensions given in inches and (mm).
• 2. Minimum Top Rail: 2 (51).
• 3. To obtain extra closing force, add 3 (76) to dimensions marked by an
  • This will limit degree of opening to 110° depending on arm adjustment.
  • This setup will not meet ADA.
  • These dimensions apply to the centerline of hinge/pivot for butt hinges, offset pivots, or center pivots.
• 4. Parallel arm bracket shown is for non hold-open applications. Bracket mounting for hold-open applications has 4 mounting holes.
• 5. A1 arms cannot be used on fire doors.

(76)

4-3/4

(121)

(76)

754F25 Drop Plate

The Habitat for Humanity®

FRAME STOP

TOP OF DOOR

3/8 (10)

RESPONSIBILITY

Door and Frame Manufacturers are responsible for providing adequate construction or reinforcements for proper installation of hardware shown. All architectural builders hardware must be installed on properly reinforced doors and frames, regardless of the type, material, or method of construction.

DC8210 Series x 754F25

Surface Door Closer Parallel Arm Mounting with 754F25 Drop Plate (with or without A1)

ASSA ABLOY

www.corbinrusswin.com Do Not Scale Drawing Dr.

Template Number T31058 04-08

Supersedes