MOUNTING INFORMATION

Sex nuts or through bolts are required for wood and plastic covered composite doors, and any type of door without reinforcements and recommended for wood core and metal clad (Kalamein) type doors.

2. Dimensions given in inches and (mm).

NOTES:

or offset pivots.

3. Minimum Top Rail: 5 (127)

RH SHOWN LH OPPOSITE

Closer To Be Installed In A True Horizontal CAUTION: Position To Ensure Proper Closer Performance.

MOUNTING SCREW SPECIFICATIONS

#12-14 self-drilling screw. 1/8 (3) diameter pilot hole required for Wood

ARM AND QUIK-INSTALL™ BRACKET

Sex nuts, furnished when ordered Applications. 1-21/32 1/4-20 THREAD

OPENING C MINIMUM В A QUIK-INSTALL™ MAXIMUM Soffit Bracket Bracket 28-7/8 (733) 85° 8-3/4 (222) 12-7/16(316) 28 (711) 90° 7-3/4 (197) 11-1/2 (292) 26-3/8 (670) 100° 6-1/4 (159) 10 (254) 4-7/8 (124) 25-1/8 (638) 110° 8-5/8 (219)

4. For A2 Arms: Auxiliary door stop required by others. 5. A2 and A5 arms cannot be used on fire doors.

1. Dimensions "A" & "B" apply to centerline of hinge/pivot for butt hinges

2-3/4 (70)DOOR 5/8 1-1/2 (16)(38)Ф._ф 1/4 3/4 4-1/2 (6) $\backslash overline\{(19)\}$ (114)15/16 HINGE 3/4 FRAME STOP (19)(24)OR PIVOT 1-3/8 (35) C Minimum Clearance FRAME STOP TOP OF DOOR

10

(254)

12 (305)

M85 OPTION 447F14 ANGLE SUPPORT BRACKET SEE MOUNTING SCREW SPECIFICATIONS (51) 2-1/4 MAXIMUM FRAME WIDTH (57)(25)(51) FRAME (51)1-1/2 (38) NOTE: ANGLE SUPPORT MUST BE DRILLED AND TAPPED IN THE FIELD DOOR

🍿 Habitat for Humanity®

(38)

(25)

RESPONSIBILITY

Door and Frame Manufacturers are responsible for providing adequate construction or reinforcements for proper installation of hardware shown. All architectural builders hardware must be installed on properly reinforced doors and frames, regardless of the type, material, or method of construction.

DC8210 Series x A2, A4, or A5

(25)

Surface Door Closer Parallel Arm Mounting By Hold Open and / or Backstop Arm

ASSA ABLOY

www.corbinrusswin.com Do Not Scale Drawing

Dr. Date 04-08 Template Number T31052