Original Source Document Full PDF Version
View PDF
← Corbin

Notes:

  • 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template.
  • 2. Do not scale drawing.
  • 3. Dimensions are in inches (mm).
  • 4. LHR door shown. Preparation is typical for both door hands.
  • 5. Shaded area represents mortise cavity from device template.
  • 6. Prepare mounting holes when installing trim.
  • 7. Provide adequate structural support to maintain door integrity during operation.

Corbin Russwin 9M10 and 9M50 Trim for ED5600 Wide Stile Mortise Wood or Composite Door Template_T30957 image on page 1

Note: Lever and knob prefix does not affect door prep.

Corbin Russwin 9M10 and 9M50 Trim for ED5600 Wide Stile Mortise Wood or Composite Door Template_T30957 image on page 1

Section X - X

9M10 9M50 Series Trim Wood or Composite Door Preparation & With ED5600 Series Mortise Exit Devices

Corbin Russwin 9M10 and 9M50 Trim for ED5600 Wide Stile Mortise Wood or Composite Door Template_T30957 image on page 1

DO NOT SCALE DRAWING SUPERSEDES

TEMPLATE NUMBER DATE

T30957 10-01