Securitron M62-EX Maglock UL Certificate of Compliance

CERTIFICATE OF COMPLIANCE

Certificate Number 20190214-E554410 Report Reference E554410-20190213 Issue Date 2019-FEBRUARY-14

Issued to: Hanchett Entry Systems Inc, DBA Securitron Magnalock

Corp

10027 S 51st St, Suite 102 PHOENIX AZ 85044-5219

This certificate confirms that representative samples of

COMPONENT - SPECIAL LOCKING ARRANGEMENTS FOR USE IN HAZARDOUS

Security Equipment for use in Class I, Division 2 Group A,

B, C and D Hazardous Locations

Special Exit Lock - M62 with suffix B, D, F, G or any

combination, followed by -EX

Have been investigated by UL in accordance with the component requirements in the Standard(s) indicated on this Certificate. UL Recognized components are incomplete

in certain constructional features or restricted in

performance capabilities and are intended for installation in complete equipment submitted for investigation to UL LLC.

Standard(s) for Safety: See Addendum Page for Standards

Additional Information: See the UL Online Certifications Directory at

https://iq.ulprospector.com for additional information.

This Certificate of Compliance does not provide authorization to apply the UL Recognized Component Mark. Only the UL Follow-Up Services Procedure provides authorization to apply the UL Mark.

Only those products bearing the UL Recognized Component Mark should be considered as being UL Certified and covered under UL's Follow-Up Services.

Look for the UL Recognized Component Mark on the product.

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

CERTIFICATE OF COMPLIANCE

Certificate Number 20190214-E554410 Report Reference E554410-20190213 Issue Date 2019-FEBRUARY-14

This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements.

UL 121201, Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations CSA C22.2 No. 213-17, Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/