Securakey SK-NET™ Client Server Installation Bulletin #24

Open the original PDF document

APPLICATIONS BULLETIN #24

Subject: SK-NET™ Client Server Installation

1.0 To install the SK-NET™ Client Server software you should install the ADS software on your network server fi rst. If you are not going to use a network server, then you must select a single workstation to act as a server for the workstations SK-NET™ will be installed on.
- 1.1 From the CD menu, select "Client Server SK-NET" and then "Install ADS". The directory where the ADS software is installed must be shared with the network.
- 1.2 When asked to provide a "serial number" and "validation code" you will fi nd these on the inside cover of your SK-NET™ manual.
- 1.3 A folder must be created and shared to store all the database fi les in. This folder must be located on the same drive as the ADS software has been installed. Example Name: Sknetdata.

2.0 SK-NET™ can be installed on any workstation on the same network where the ADS software has been installed. You can purchase a license to install SK-NET™ on to a workstation for as many as 2 to 15 workstations.
- 2.1 From the CD menu select "Client Server SK-Net" and then New SK-Net Installation".
- 2.2 When asked where to install SK-NET™, we recommend that you accept the default location.
- 2.3 When asked where to "Install SK-Net Database ", browse to the mapped drive and select the database folder you created. Example: Sknetdata.
- 2.4 Complete the installation. Once you start SK-NET™ for each location, verify in the lower right hand corner that it displays "Client Server Version".

DATE: 10/12/06 REV.: -- AF#: 6593

SECURA KEY 20301 Nordhoff St. • Chatsworth, CA 91311 phone 818-882-0020 • fax 818-882-7052 Toll Free - 800-891-0020

PAGE ____ OF ____ 1 1