S6100 CAD Template

801 Avenida Acaso, Camarillo, Ca. 93012 • (805) 494-0622 • Fax: (805) 494-8861 www.sdcsecurity.com E-mail: service@sdcsecurity.com TEMPLATE-S6100Devices covered by this template: Panic Rim Device and Fire Rim Device. 4X .201 dia. THRUBACKSET 2-7/16"TO FACE OF STOP2.00"3-11/16"TO FACE OF STOPBACKSET 2-7/16"OFDEVICELC 3-11/16"40"Watch for special mounting height requirements FINISHED FLOORINSIDE.575.5941.188AFTER EXIT DEVICE IS CUT AND MOUNTED, INSTALL END CAP BRACKET CENTERED ON DEVICE LC INSIDE MOUNTING HOLESFor Metal Door SurfaceApplication: 1. Drill .201 dia. holesas marked2. Use #1/4-20 tap. For Sex Bolt Application: Metal Door: .280" Drill Inside3/8" Drill OutsideWood Door: 3/8" Drill Thru(Suggested to fix Device Chassis by Sex Bolt) OPTIONAL1/2"dia.WIRE RUN1/2" dia.CLEARANCENOT TO SCALEDimensional drawing only STRIKE MOUNTING HOLES:1. Drill .201 dia. (#7 Drill) holes 2X. 2. Use #1/4-20 Tap ADJUST THE STRIKE FOR PROPER ALIGNMENT WITH THE LATCH BOLT.LOCK STRIKE IN PLACE BY TIGHTENING THE SCREWS AT THE "X" & "Y" POSITIONS USING A 3/16" dia. DRILL. DRILL THE 3rd HOLE AT THE "Z" POSITION AND TAP WITH A #12-24 TAP. ATTACH 3rd SCREW.STRIKE1-3/32"OFSTRIKE2-5/8"XYZLC THIS SIDE UP FOR LHR DOORTHIS SIDE UP FOR RHR DOOR