Pemko Inswing Astragal Punch Order Form
Open the original PDF document
View PDFArchitectural Door Accessories
Pemko Inswing Astragal Punching Customer Form 3493, 3494, 3495, 3496
Please fill in all boxes below with the relevant information. All boxes must be filled in to ensure you receive the correct astragal.
| PART NO. | CUSTOMER | |
|---|---|---|
| PEMKO ORDER NO. | CUSTOMER P.O. NO. | DATE |
|
DIM. "A", TOP TO CENTERLINE OF
DEADBOLT FACE CUTOUT DIM. "B", CENTER TO CENTER BETWEEN DEADBOLT AND LATCHBOLT FACE NOTE: DEADBOLT AND LATCHBOLT FACE CUTOUTS ARE 3/4" WIDE X 2" HIGH. THE WIDTH IS CONSTANT, BUT THE HEIGHT CAN BE GREATER IF REQUIRED. OR ONE CONTINUOUS PUNCHOUT CAN BE USED TO COVER BOTH BOLTS (USE DIM. "C" BOX) NON-RETURNABLE |
Manufacturer reserves the right to make changes without formal notice. Contact Engineering for latest revision. Printed copies of this document are uncontrolled.
www.assaabloydooraccessories.us
USA:
Ventura, CA 93003 Phone: 800.283.9988
Memphis, TN 38141 Phone: 800.824.3018
Canada: Toronto, ON L4K4T9 Phone: 877.535.7888