PDQ 7101 Door Closer Models – 719304 7100 DSHO Template

Open the original PDF document

7101 DOOR CLOSER MODELS

PARALLEL ARM INSTALLATION - PUSH SIDE DS AND DSHO APPLICATIONS

Α BOTTOM OF FRAME FACE 1" 1" 25.4 76.2 25.4 2-3/16" BOTTOM OF 55.6 STOP 2-1/4" 57.2 MACHINE ONE ADDITIONAL HOLE AFTER INSTALLTION OF BRACKET FACE OF STOP 0 D 11/16" 17.5 1-11/16" 42.9 5/16" 7.9 5/8" 5/8" Œ Hinge 15.9 [15.9 ] or 2-1/8"

MACHINE SCREWS:
USE #7 OR 13/64" [5.1] DRILL AND 1/4-20 TAP

RFV. 2

TEMPLATE: 719304,

08-21-18

WOOD DOOR/FRAME SCREWS: USE 5/32" [4] DRILL

SEX NUTS:

USE 3/8" [9.5] DRILL (CLOSER TO DOOR)

Opening ^^	Dim. A	Dim. B
TO 85°	9-1/2" [241.3]	9-1/2" [241.3]
86° TO 90°	8-3/4" [222.3]	8-3/4" [222.3]
91° TO 100°	7-5/8" [193.7]	7-5/8" [193.7]
101° TO 110°	6-5/8" [168.3]	6-5/8" [168.3]
Dim. C *
MIN. TO BOTTOM OF CLOSER		5-1/8" [130.2]
MIN. TO BOTTOM OF COVER 5-7/8" [149.2]
Dim. D
MIN. STOP DEPTH RECOMMENDED 1-1/4" [31.8]

* MIN. RAIL DIMENSIONS BASED ON 5/8" [15.9] STOP HEIGHT AND 1/8" [3.2] TOP DOOR GAP.

** DOOR MAY SWING UP TO 5° BEYOND STOP/HO POINT INDICATED

4. DIMENSIONS BASED ON 4-1/2" X 4-1/2" BUTT HINGES.

Pivot

1. DRAWING IS NOT TO SCALE.

2. DIMENSIONS IN

INCHES

IMM1 ·

NOTES:

5. MUST BE MOUNTED FOR 100° OR 110° OPENING TO MEET ADA REQUIREMENTS.
6. DOOR SWING MAY BE ALTERED DUE TO OTHER LIMITING CONDITIONS.

3. LEFT HAND DOOR SHOWN, FOR RIGHT HAND DOOR REVERSE IMAGE.

7. CAUTION: SEX NUTS MAY BE REQUIRED FOR UNREINFORCED DOORS OR COMPOSITE FIRE DOORS. CONSULT MANUFACTURER'S RECOMMENDATIONS.

3-3/8"

85.7

8. HOLD OPEN ARMS CAN NOT BE USED ON LABELED FIRE DOORS.
9. ALWAYS CHECK PDQ WEBSITE FOR THE MOST RECENT REVISION AT WWW.PDQLOCKS.COM.

PDQ Manufacturing 2230 Embassy Dr. Lancaster, PA 17603 833-273-7832 833-2 PDQTEC