Norton Rixson No. 9 Checkmate Series Door Stop and Holder, Surface Mounted Template_OH80060A
Open the original PDF document
View PDF
INSTALLATION INSTRUCTIONS
- 1. Select and determine degree of hold open or dead stop from chart on OH80060B. NOTE: Add 5/8" (15.8) to "A" dimension for dead stop.
- 2. Locate "A" and "B" dimensions on door and frame.
5. Install channel on door with "A" dimension sex bolt. Locate "C" dimension sex bolt hole making sure that channel is horizontal and parallel with stop strip. Drill 1/2" (12.7) dia. sex bolt hole and finish installing holder. Install control knob on channel as shown.
Notes:
- All hollow metal frames should be properly reinforced with 3/16" (4.8) min. thickness x 12" (304.8) min. length reinforcement plates.
- All hollow metal doors should be properly reinforced with 2-1/2" (63.5) wide x 3/16" (4.8) min. thick x full width of door reinforcement plates.
- If dead stop is required add 5/8" (15.8) to "A" dimension as noted on OH80060B.
- All drilling and tapping to be done by field men.
- Suggest mounting door stop or holder first and then other hardware to clear. Contact factory if interference results with other hardware.
- Left hand shown right hand opposite. (Note hole pattern in jamb bracket).
- All dimensions are given in inches (mm).
Caution:
Note location of swing clear hinge centerline to determine "A" and "B" dimensions.
| Screw Details | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Jamb | Door | ||||||||||
| #1/4-20 x 3/4" FHMS | 5/16-18 x 2" FHMS | ||||||||||
| or | and | ||||||||||
| #14 x 1-1/2" FHWS | 1/2" Dia. Sex Bolt | ||||||||||
| (4 Places) | (2 Places) | ||||||||||
No. 9 Series Surface Mounted Door Stops and Holders
RIXSON ASSA ABLOY
TEMPLATE NUMBER
Approved 2022-05-02
OH80060A|1 of 2 4 |01/22
No. 9 Series Surface Mounted Door Stops and Holders
- 1. See other side for installation instructions.
- 2. Select proper dimensions noted below.
- 3. All drilling and tapping to be done in field.
- 4. Add 5/8" (15.8) to "A" dimension for dead stop.
- 5. All dimensions given in inches.
Reversible, non-handed.
H.O. = Hold Open D.S. = Dead Stop
| Device | Degree | 85° | 90° | 9 | 5° | 100° | 105° | 11 | 10° | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number | r | L | H.O. | D.S. | H.O. | D.S. | H.O. | D.S. | H.O. | D.S. | Н.0 | 0. | D. | S. | Н. | 0. | D.S | S. | |||||||||||
|
Fric-
tion |
H.O. | Stop |
Door
Opening |
А | В | A | В | Α | В | A | В | A | В | Α | В | Α | В | Α | В | Α | В | A | В | Α | В | A | В | С | |
| Butts | 9-116 | 9-126 | 9-136 | 24 - 28 | 4 4 | 4 3 / 4 | 4 7 8 | 4 4 | 3 7 / 8 |
4
|
41/2 | 4 3 / 8 | 3 9 | 4 1 6 | 4 3 | 4 1 6 | 3 5 / 16 | 3 13 / 16 | 3 15 / 16 | 3 13 / 16 | 15 15 / 16 | ||||||||
|
& 3
4 Offset |
9-216 | 9-226 | 9-236 |
28
|
6 8 | 5 7 / 8 | 6 3 / 4 | 5 7 / 8 | 5 11 | 5 7 | 6 5 |
5
|
5 3 / 8 | 5 1 8 | 6 |
5
|
5 1 |
4
13
4 16 |
5 11 / 16 | 4 13 | 4 3 / 4 | 41/2 | 5 8 | 4 1 | 4 9 | 4 5 |
5
|
4 5 |
17
|
| Pivot | 9-316 | 9-326 | 9-336 |
33
|
9 3 / 4 | 71/4 | 10 3 / 8 | 74 | 9 1/4 | 6 3 / 4 |
9
|
6 3 |
8
|
616 |
9
|
616 |
8
|
5
15
5 16 |
9 1 | 5 15 |
8 1
8 8 |
5 8 |
8
|
5 5 / 8 |
7
|
5 8 | 81/2 | 5 8 | 18 11 / 16 |
| 9-416 | 9-426 | 9-436 |
38
|
12 11 / 16 | 9 1 | 13 5 / 16 | 9 1 | 12 1 / 8 | 8 2 | 12 3 / 4 | 8 1 | 11 5 / 8 | 8 | 12 1 / 4 | 8 |
11
|
7 9 | 11 13 / 16 | 7 9 | 10 13 / 16 | 7 3 |
11
|
7 3 | 10 1 / 2 | 6 8 | 11 1 / 8 | 6 8 | 20 13 / 16 | |
| 9-516 | 9-526 | 9-536 |
43
|
16 1 / 4 | 10 3 / 8 | 16 7 / 8 | 10 3 / 8 | 15 5 / 8 | 9 3 / 4 | 16 1 / 4 |
9
|
15 | 9 1 | 15 5 / 8 | 9 1 | 14 1 / 2 |
8
|
15 8 | 8 5 / 8 | 14 1 |
8
|
14 11 / 16 | 8 3 | 13 11 / 16 |
7
|
14
|
7
|
22
|
|
NOTE: A and B dimensions measured from centerline of pivot, not edge of door.
|
Device
Number |
Degree | 85° | 90° | 9 | 5° | 10 | 0° | 105° | 110° | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Degree | H.O. | D.S. | H.O. | D.S. | H.O. | D.S. | H.O. | D.S. | H. | H.O. | S. | H.O. | ). D.S | ||||||||||||||||
|
Fric-
tion |
H.O. | Stop |
Door
Opening |
Α | В | А | В | Α | В | Α | В | Α | В | A | В | Α | В | Α | В | Α | В | Α | В | А | В | Α | В | С | |
|
1
3
/
4
-2
1
/
4
Center Hung |
9-116 | 9-126 | 9-136 | 25 1 / 2 - 30 | 5 1 | 5 9 / 16 |
5 11
5 16 |
5 9 / 16 | 4 3 / 4 | 5 1 | 5 3/8 | 5 1 |
4
|
4
15
4 16 |
5 1 | 4 15 |
4
|
4 11 |
4
13
4 16 |
4 11 | 3 15 / 16 |
4
|
4 16 |
4
|
3
|
4
|
4 5 / 16 |
4
|
15 15 / 16 |
| 9-216 | 9-226 | 9-236 |
30
|
6 8 | 6 2 | 7 1 | 6 1 | 6 1 | 6 8 | 7 1 | 68 | 6 8 | 5 4 | 6 3 / 4 |
5
|
5 13
5 16 |
5
|
6
|
5
|
5 9 |
5
|
616 | 516 |
5
516 |
4 15 | 5 15 | 4 15 |
17
|
|
| 9-316 | 9-326 | 9-336 |
36
|
10 1 / 2 | 8 | 11 1 / 8 | 8 | 10 | 7 1 | 10 5 / 8 |
|
9 9 | 7 1 |
10
|
7 1 | 9 3 | 6 11 |
9
13
9 16 |
6 11 |
8
|
6 8 | 9 1 | 6 8 | 8 9 | 6 1 |
9
|
6 1 | 18 11 / 16 | |
| 9-416 | 9-426 | 9-436 |
41
|
13 3 / 8 | 9 3 / 4 | 14 | 9 3 |
12
|
9 3 | 13 7 / 16 |
9
|
12 5 | 8 11 | 12 15 | 8 11 |
1113
1116 |
8 3 / 16 | 12 7 / 16 |
8
|
11
|
7 13 / 16 | 12 1 | 7 13 / 16 | 11 1 / 8 | 7 1 | 11 3 / 4 | 7 2 | 20 13 / 16 | |
| 9-516 | 9-526 | 9-536 | 4616 - 50 | 17 1 | 11 3 / 16 |
17 11
17 16 |
11
|
16 3 | 10 1 / 2 | 17 | 10 1 / 2 | 15 3 / 4 |
9
|
16 8 |
9
|
15 1 / 4 | 9 3 / 8 | 15 7 / 8 | 9 3 | 14 3 |
8
|
15 3 / 8 |
8
|
14 3 / 8 | 8 1 | 15 | 8 1 |
22
|
|
No. 9 Series Surface Mounted Door Stops and Holders
RIXSON ASSA ABLOY
TEMPLATE NUMBER
SHEET
REV DATE
OH80060B 2 of 2 4 01/22