Norton 7500 Series Door Closer P7500 P7700 x 7701-5A Arm 180° Using Wide Throw Hinges 8 with or without 7788 Drop Plate Non-Hold Open Parallel Template

Open the original PDF document

9/32" (7 mm)thru; 3/8" (9.5 mm) dia. ^x 3/8" (9.5 mm) deep on door or transom-face Optional Through-bolts and grommet-nuts All Fasteners Door or Frame Drill-Sizes #14 SMS Type A Arm: 1-1/4" (32mm) Closer: 2-3/4" (70mm) Wood 3/16" (4.8 mm) Pilot Hole Required 1/4" - 20 machine screw Metal Drill: #7 (0.201" dia.) Tap: 1/4 - 20 Sex nuts and bolts Hollow Metal 9/32" (7 mm) through; 3/8" (9.5 mm) door or transom-face opposite to closer Aluminum or Wood 3/8" (9.5 mm) through

Preparation for Fasteners

Notes:

1. Do not scale drawing
2. Left hand door shown
3. Dimensions are in inches (mm).
Caution: Door swing may be limited by door, frame, wall, or hardware conditions. 4.
5. Hollow-metal doors require channel or box-type reinforcement when thru-bolt mount is specified.
6. Sex-bolts required for wood or plastic faced fire-door mounting.
7. Minimum thickness recommended for reinforcements in hollowmetal doors and frames: .1046 (2.66mm) unless otherwise noted.

P7500 or P7700 Series Door Closers ^x 7701-5A Arm Assembly For 180° Door Swing Using Wide Throw Hinges – 8" (200mm) Max. With or Without 7788 Drop Plate Parallel Arm Application Door Closer Sizes: 7500 (1 thru 6); 7700 (2, 3, 4, 5, or 6) Non-Hold Open

7377-0214 TEMPLATE NUMBER DATE

07-08

opposite to closer