Locknetics MG600 MG600DT Electromagnetic Lock Template 112102

TEMPLATE PLACE AGAINST HEADER FOLD ON DOTTED LINE PLACE 60MM(2.36") FROM SIDE FRAME PLACE AGAINST DOOR OPPOSITE HINGES FOR L.H. DOOR INSTALLATION PLACE 60MM(2.36") FROM SIDE FRAME OPPOSITE HINGES FOR R.H. DOOR INSTALLATION DRILL 3.2mm HOLE (2 PLACES ) (1/8") DRILL 10mm HOLE FOR CABLE (11/16") DRILL 16mm HOLE MG600/MG600DT

TEMPLATE INSTRUCTIONS-SLMLINE MAGNET RANGE

This Template is designed for use with the Flat mounting plate for Outward opening doors. It can also be used to mark the position of the Armature plate when using the Transom ' L ' bracket.

Fold the Template along the dotted line as indicated.

The edge of the Template must be placed 60mm(2.36") from the side Frame opposite the hinges.

The Door must be closed and latched when using the Template.

Ensure the Template is firmly fixed to the Door and Frame when Marking & Drilling.

Before drilling any holes check that the Frame is deep enough to take the depth of drilling as shown above. Check that the door is between 35 and 50 mm thick.

When all the holes have been drilled remove the Template and fit the Armature Plate and Magnet as per the instructions.