LCN_4630_&_4640_Series_Remote_Key_Switch_Installation_Instructions_109698

29285

8310-806K Remote Key Switch

Installation Instructions

The 8310-806K allows the Electric Auto-Equalizer to be set to one of three modes.

• OFF the operator will not respond to any input signals.
• AUTO the operator will respond to input signals and open the door.
• HOLD OPEN the operator will open the door to 90° and remain there until the key is turned to another position.
• L NOTE: the key can be removed in any position.

To install:

• 1a Use stick-on template (provided) and place at desired position. Drill the (2) .116" dia. holes and the (1) 1" dia. hole as shown.
• 1b Route the 6' wire cable to the operator.
• 1c Connect the green wire to terminal 21.
• 1d Connect the black wire to terminal 19.
• 1e Connect the red wire to terminal 6.
• 1f Use the key to put the operator in the desired mode.