Installation Instructions for Applying Thumbpiece Outside Trim for 20 & 30 Series

A7369B 10-20-10 2828 3828 Center Chassis NOTE: 1] FOR USE WITH SARGENT 20 & 30 SERIES EXIT DEVICES. 2] TRIM IS NON-HANDED. 3] FOR USE WITH 1 3/4" THICK DOORS ONLY. 4] FOR USE WITH SARGENT, ASSA V10, AND BEST CYLINDERS ONLY. Vertical Chassis Centerline 866-TP LOCKABLE THUMBPIECE TRIM 1] ATTACH THE COLLAR AND MORTISE CYLINDER TO THE TRIM PLATE WITH THE MORTISE NUT. 2] ATTACH TRIM TO DOOR THRUBOLTING (2) SCREWS TO THE CHASSIS & THE (2) CUP WASHERS AND SCREWS AT THE TOP & BOTTOM TO THE DOOR. 828-TP ALWAYS OPERABLE THUMBPIECE TRIM 1] ATTACH TRIM TO DOOR THRUBOLTING THE (2) SCREWS TO THE CHASSIS & (1) CUP WASHER AND SCREW AT THE BOTTOM TO THE DOOR. 810-TP DUMMY THUMBPIECE TRIM 1] ATTACH TRIM TO DOOR THRUBOLTING THE (2) SCREWS TO THE CHASSIS & (1) CUP WASHER AND SCREW AT THE BOTTOM TO THE DOOR. 814-TP CYLINDER THUMBPIECE TRIM 1] ATTACH COLLAR, BACKPLATE AND RIM CYLINDER TO THE TRIM PLATE WITH THE (2) CYLINDER SCREWS. 2] ATTACH TRIM TO DOOR THRUBOLTING THE (2) SCREWS TO THE CHASSIS & THE (1) CUP WASHER AND SCREW AT THE BOTTOM TO THE DOOR. 2727 3727 Center Chassis Cylinder Nut Blocking Ring Mortise Cylinder Cylinder Back Plate Rim Cylinder Cylinder Screw Collar 20 & 30 SERIES EXIT DEVICE INSTRUCTIONS FOR APPLYING THE SARGENT THUMBPIECE OUTSIDE TRIM Copyright © 2010 SARGENT Manufacturing. All rights reserved. Reproduction in whole or in part without the express written permission of SARGENT Manufacturing is prohibited.