Installation Instructions for 1431W Corner Bracket

FCQT

USING DATA SHEET SUPPLED WITH OORNER BRACKET, LOCATE AND MOUNT BRACKET TO FRAME, ATTACH FOOT TO DOOR WITH PIVOT AWAY FROM HINGE, AS ILLUSTRATED FRO AMT YPES TO AND "F. SEE DATA SHEET FOR A CORRECT POSITIONING OF TYPE "H" FOOT. SEE

OF DOOR

FROM HINGE PIVOT-AWAY

DOOR SHOWN

NOTE: WHEN REQUIRED ADDITIONAL CLOSING POWER MAY BE OBTAINED BY MOVING PIVOTTO HOLE NEAREST HINGE.

LEFT HAND DOOR SHOWN BRACKET IS UNHANDED)

IMPORTANT (250 CLOSEF ONLY) BODY ASSEMBLY IS HANDED AND MUST BE OPPOSITE THE HAND OF DOOR, A RIGHT HAND CLOSER WILL BE REQUIRED FOR LEFT HAND DOOR SHOWN.

ω END OF CLOSER FACING TOWARD HINGE ATTACH CLOSER TO BRACKET WITH SHORT

250W CORNER BRACKET

1430W CORNER BRACKET 430 SERIES LUSTRATED

ILLUSTRATED BELOW. ATTACH ARM WITH WASHER MARK ON SPINDLE ALIGNED WITH AXIS OF ARM AS AND SCREW 1. ASSEMBLE MAIN ARM TO CLOSER WITH INDEX

0

ACCUSED AND ALCOHOL

ELLUSTRAT

CLOSEN

2. OPEN DOOR AND INSERT RECTANGULAR ROD INTO SWIVEL (OR HOLD OPEN) ARM-THEN CLOSE SEE ILLUSTRATIONS BELOW. MAIN ARM IS AT RIGHT ANGLE TO DOOR DOOR AND TIGHTEN ARM SCREW SECURELY WHEN

INSTALLING SEE INSTRUCTION SHEET FURNISHED WITH CLOSER FOR COVER AND FOR FINAL ADJUSTMENT INFORMATION.