HES K100 KS100 R100 Cabinet Lock IC Certification
Open the original PDF document
View PDFTECHNICAL ACCEPTANCE CERTIFICATE CERTIFICAT D' ACCEPTABILITÉ TECHNIQUE
Tracking Number : CS27835, Issue 2 Certification No.: 7160A-R100V3
Pistage du Nombre No. DE CERTIFICATION
Application Type: Product Modifications (C2PC) Issued Date (Date Publiée): September 12, 2019
Issued To (DÉLIVRÉ A): Hanchett Entry Systems, Inc.
Address 10027 S. 51st Street, Phoenix, AZ 85027 USA
Product Description (DESCRIPTION DU MATÉRIEL): RFID Module Trade Name (MARQUE): N/A HVIN : R100-V3 FVIN : N/A
PMN : Aperio V3 Wireless Reader HMN : K100-V3, KS100-V3
Tested By (TESTÉ A) : Bureau Veritas Consumer Product Services, Test Site Registration Number (Numéro du site de test): 2762A
Inc.
Address (adresse) : One Distribution Center Circle, Suite # 1, Littleton, MA 01460
Email : Scott.Lambert@us.bureauveritas.com Fax : 978-486-8828 Tel : 978-486-8880
Radio Standards Specification (No., Issue & Date) RSS SPÉCIFICATION/ ÉDITION & DATE RSS-Gen, Issue No. 5, Issue Date: April 2018 RSS-102, Issue No. 5, Issue Date: March 2015 RSS-210, Issue No. 9, Issue Date: August 2016 RSS-247, Issue No. 2, Issue Date: February 2017
Wire Loop Non-detachable antenna @ 0.1246-0.1246MHz PCB Loop Non-detachable antenna @ 13.56-13.56MHz
Antenna Information (INFO SUR L'ANTENNE) PCB Surface-mount Non-detachable antenna with 3.45dBi gain @ 2405-2480MHz
| Frequency Range(MHz) | RF Power (W) | Emission Designator |
|---|---|---|
| (BANDE DE FRÉQUENCES) | PUISSANCE H.F. | Émissions Designator |
| 0.1246-0.1246 | 52.4dBuV/m @ 3m | 2K49A1D |
| 13.56-13.56 | 62.8dBuV/m @ 3m | 2K72A1D |
| 2405-2480 | 0.002 | 2M84F1D |
"Certification of equipment means only that the equipment has met the requirements of the above-noted specification. Licence applications, where applicable to use certified equipment, are acted on accordingly by the Industry Canada issuing office and will depend on the existing radio environment, service and location of operation. This certificate is issued on condition that the holder complies and will continue to comply with the requirements and procedures issued by Industry Canada. The equipment for which this certificate is issued shall not be manufactured, imported, distributed, leased, offered for sale or sold unless the equipment complies with the applicable technical specifications and procedures issued by Industry Canada.."
La certification du matériel signifie seulement que le matériel a satisfait aux exigences de la norme indiquée ci-dessus. Les demandes de licences nécessaires pour l'utilisation du matériel certifié sont traitées en conséquence par le bureau de délivrance d'Industrie Canada et dépendent des conditions radio ambiantes, du service et de l'emplacement d'exploitation. Le présent certificat est délivré à la condition que le titulaire satisfasse et continue de satisfaire aux exigences et aux procédures d'Industrie Canada. Le matériel à l'égard duquel le présent certificat est délivré ne doit pas être fabriqué, importé, distribué, loué, mis en vente ou vendu à moins d'être conforme aux procédures et aux spécifications techniques applicables publiées par Industrie Canada..
I hereby attest that the subject equipment was tested and found in compliance with the above-noted specification . .
J'atteste, par la présente, que le matériel a fait l'objet d'essai et a été jugé conforme à la spécification ci-dessus..
Signature: Scott Lambert
Certifications Manager Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway, Milpitas, CA 95035 USA Tel: 408 526 1188, Fax: 408 526 1088
Website : https://cpsusa-bureauveritas.com, Email : sales.eaw@us.bureauveritas.com Please check the validation of this certificate at BV CPS Cert Validation Portal
