Falcon_920DT_&_920NL_Trims_for_F-19-Series_Device_Installation_Instructions_107880

Open the original PDF document

View PDF

920DT, 920NL

D-2001/2008

Installation Instructions

  • 1. Prepare inside face of door for device.
  • A. See device directions for locations of vertical and device ref. centerlines.
  • 2. Prepare outside face of door for trim.
  • A. Transfer vertical and device centerlines from inside face to outside face of door. Be sure vertical centerline is parallel to edge of door.
  • B. Locate and prepare all holes as indicated.
  • 3. Install trim on door.