47260192

FALCON ®

214 Series Key-In-Lever/Knob Trim

For use with Economy Type Exit Devices

Installation Instructions

Drill holes

• 1. Drill one ø 2-1/8" (54 mm) through hole as shown on the template.
• 2. Drill one $\backslash emptyset$ 5/16" (8.1 mm) on outside face of door for use with anti-rotation studs.

Install Trim

• 1. Insert trim into the holes in door from outside of door.
• 2. Place 9-hole bracket plate into the hole on inside face of door.
  • Make sure the 9-hole bracket plate is seated at a right angle. The orientation of the bracket plate must match the recessed back of the exit device. Bracket plate holes A and B must align with the trim mounting posts.
• 3. Insert the two (2) provided mounting screws through the 9-hole bracket plate and into the mounting posts of the trim, and tighten the mounting screws.

Install Exit Device

• 1. Install the exit device on inside face of door using the two (2) provided round head screws. For details on exit device installation, see exit device installation instructions.
• Make sure the trim spindle is inserted into the device cam on the back of the exit device.
• 3. Check the exit device and trim to be sure each is securely installed and adequately tightened for best operation.

Customer Service

1-877-671-7011 ww

www.allegion.com/us