Falcon_18_&_XX_F-18_&_F-XX-Series_812L_and_816L_Trims_Installation_Instructions_107887

Open the original PDF document

812L & 816L

FALCON ®

D-2115 Trims for (F)18 and (F)XX Series Rim Devices

Installation Instructions


Cus	tomer	· Serv	ice

1-877-671-7011 www.allegion.com/us

PREPARE INSIDE FACE OF DOOR FOR DEVICE. SEE DEVICE DIRECTIONS FOR LOCATIONS OF VERT. AND DEVICE REF. CENTER LINES.
2. PREPARE OUTSIDE FACE OF DOOR FOR TRIM:
- A. TRANSFER VERT. AND DEVICE REF. CENTER LINES FROM INSIDE FACE TO OUTSIDE FACE OF DOOR. BE SURE VERT. CENTER LINE IS PARALLEL TO EDGE OF DOOR.
- B. LOCATE AND PREPARE ALL HOLES AS INDICATED.
3. RE-HAND TRIM IF NECESSARY (SEE OTHER SIDE). ST TRIM CANNOT BE RE-HANDED.
INSTALL TRIM ON DOOR AND CUT LEVER SPINDLE TO SIZE:
- A. TRIM MOUNTING: FOUR STUDS ARE THRU-BOLTED TO DEVICE WHEN DEVICE IS INSTALLED. NOTE: FOR F-18-R AND F-XX-R DEVICES ON WOOD DOOR, INSERT SEX BOLTS INTO TWO HOLES PRIOR TO INSTALLING TRIM.
- B. CUT LEVER SPINDLE TO EXTEND 5/8" TO 3/4" BEYOND DOOR SKIN.
5. IF REQUIRED, INSTALL RIM CYLINDER AND CUT TAILPIECE TO EXTEND 3/8" BEYOND INSIDE FACE OF DOOR (SEE OTHER SIDE).
INSTALL DEVICE ON DOOR PER DEVICE INSTRUCTIONS.