Falcon_18_&_XX_DT_&_P_Trim_Installation_Instructions_109644

Open the original PDF document

(F)XX-R-DT (F)XX-R-P (F)XX-M-DT (F)XX-M-P (F)XX-V-DT (F)XX-V-P (F)XX-TPL-DT

OMIT 1-1/4" OMIT 1-1/4" OMIT OMIT OMIT

OMIT OMIT OMIT OMIT OMIT OMIT OMIT

OMIT OMIT OMIT OMIT OMIT 1-1/4" OMIT

(F)18-R-DT (F)18-R-P (F)18-M-DT (F)18-M-P (F)18-V-DT (F)18-V-P (F)18-TPL-DT

OMIT 1-1/4" OMIT 1-1/4" OMIT OMIT OMIT

OMIT OMIT OMIT OMIT OMIT 1-1/4" OMIT

OMIT OMIT OMIT OMIT OMIT OMIT OMIT

INSTALLATION INSTRUCTIONS

1. PREPARE INSIDE FACE OF DOOR FOR DEVICE.
A. SEE DEVICE DIRECTIONS FOR LOCATIONS OF VERT. AND DEVICE REF. CENTERLINES.
2. PREPARE OUTSIDE FACE OF DOOR FOR TRIM.
- A. TRANSFER VERT. AND DEVICE REF. CENTERLINES FROM INSIDE FACE TO OUTSIDE FACE OF DOOR. BE SURE VERT. CENTERLINE IS PARALLEL TO EDGE OF DOOR.
- B. LOCATE AND PREPARE ALL HOLES AS INDICATED.
3. INSTALL TRIM ON DOOR.
BOTTOM STUD: 1/4"-20x3/4" FPHMS & FINISH WASHER
TOP FOUR STUDS: ARE THRU-BOLTED TO DEVICE WHEN DEVICE IS INSTALLED.

NOTE: FOR F-18-R & F-XX-R DEVICES, INSERT SEXBOLTS INTO TWO HOLES PRIOR TO INSTALLING

4. INSTALL CYLINDER (IF REQUIRED).
A. IF USING MORTISE CYLINDER, INSTALL CYLINDER INTO MORTISE LOCK.
B. IF USING RIM CYLINDER, INSTALL CYLINDER TO TRIM. THEN CUT TAILPIECE TO EXTEND 3/8" BEYOND INSIDE FACE OF DOOR.
5. INSTALL DEVICE ON DOOR PER DEVICE INSTRUCTIONS.

TECHNICAL SERVICE / CUSTOMER SERVICE 800-826-5972 FAX-ON-DEMAND 877-454-9696

VANGUARD TRIM - DT & P FUNCTIONS FOR (F)18 & (F)XX SERIES DEVICES

FOR VANGUARD TRIM - T FUNCTION, SEE OTHER SIDE