Falcon H2 Series H2101 and H2171 Square Corner Metal Door Template 111784

Open the original PDF document

View PDF

FALCON ®

H2 Series

Model H2101, H2171

Door Type:Metal, Flat or BeveledDoor Thickness:1¾" (44 mm) - 2" (51 mm)Faceplate:Square Corner, 1" (25 mm)

Backsets: 2¾" (70 mm)

For metal door installations suitable reinforcement is required to support latch in center of door and to prevent lateral movement. .156"±.005 (4) Bevel .125" in 2.000" (3 in 51) Backset -Door Thickness Ç +.015 -.000 1.000" (25) .313" (8) +.015 2.250" -.000 1.625" ±.005 Ç (41)(57) +.015 1.000" -.000 2.125" (54) -.000 (25)Dia. Hole .313" (8) 4" (102) Notches for anchors +.015 +.015 156" (4) deep ÒR ፍ 51/2" (140) .313" on both sides of hole, <sup>⊩</sup> (33) (33) on outside of door (8) +.015 2.250" –.000 1.625" ±.005 Ç (41) (57) +.015 -1.000" 2.125" (54) +.015 Dia. Hole - 000 (25).313" 1.235" (31) 1.235" (31) #8-32 Tap (M4) (8) in four places 2.469" (63)

ALLEGION