Electrified Functions (70,71,72,73 Functions) & Prefixes (RX, LX, DX) & NAC-270, 271, 274, 275, 280, 281

Open the original PDF document

REVISIONS APPROVED ZONE DESCRIPTION DATE REVISED PER EN72931 1. REFERENCE DIMENSIONS REMOVED AND NOTE 1 REVISED 2. SHEET FORMAT UPDATED 3. NOTE 1, MATERIAL COMPLIANCE NOTE ADDED TO DRAWING A8, C8, D7 10/27/2022 TWF METAL DOOR PREP $\emptyset$ 3/8" RACEWAY TO POWER TRANSFER DEVICE (SEE NOTES 5, 6 & 7) OUTSIDE OF DOOR INSIDE OF DOOR Q OF BEVEL Q OF DOOR 2 3/4" BACKSET FROM & OF BEVEL c==# Q OF STRIKE (3.875) (.375) (1.797) G OF LEVER OR KNOB 9 REFER TO ANSI / BHMA SPECIFICATION A156.115 FOR STRIKE PREPARATION 2 3/4" BACKSET - (HATCHED AREA 15/64" DEEP FROM & OF BEVEL FROM EDGE OF DOOR) 1. SEE TEMPLATE 7057 FOR HOLES AND DIMENSIONS REQUIRED FOR THE LOCK FUNCTION BEING APPLIED SEE APPROPRIATE TRIM TEMPLATE FOR REQUIRED HOLES AND DIMENSIONS. 2. SUITABLE REINFORCEMENT REQUIRED FOR METAL DOORS. SARGENT Manufacturing Company 3. FOR WOOD DOOR SPECIFIC PREP SEE SHEET 2. 100 Sargent Drive New Haven, CT 06511 ASSA ABLOY 4. FOR STANDARD STRIKE TEMPLATING, SEE TEMPLATE 7063. ELEASE DATE 5. PROVIDE AREA TO BE FREE OF OBSTRUCTIONS FOR WIRE HARNESS THROUGH DOOR. ELECTRIFIED MORTISE LOCK DOOR TEMPLATE 10-OCT-22 6. FOR ELECTROLYNX APPLICATIONS, REFER TO MCKINNEY TRANSFER DEVICE CATALOG. (FOR FUNCTIONS 70 THRU 73) 7. CONSULT WITH POWER TRANSFER DEVICE MANUFACTURER FOR DOOR AND FRAME TEMPLATE DETAILS. & (PREFIXES: RX-, LX- & DX-) 8. TOLERANCE ALL DIMENSIONS ±.015. & (NAC-270/271/274/275/280/281) SHEET 1 - 7065 9 В UNLESS OTHERWISE DRAWING COMPLIES SPECIFIED TOLERANCES WITH ASME Y14.5M - 1994 Oak DOOR MANUFACTURERS TEMPLATE NOTICE TO PERSONS RECEIVING THIS DRAWING AND/OR TECHNICAL INFORMATION The material disclosed herein is the confidential and proprietary information of ELECTRIFIED MORTISE LOCK INCH Sargent Manufacturing Company (the "Company"). This drawing and/or technical information is issued in X.XXX ± .000 ANGLES ± 1° FRACTIONS ± 1/64 SURFACE FINISH 63/ MM DESIGNED BY TWF DATE CREATED 04/26/2018 DRAWN BY confidence for engineering information only and may not be reproduced or used to manufacture anything, including the items shown or referred to hereon, without direct written THIRD ANGLE PROJECTION HEAT TREATMENT 9 NOTES: 1. MATERIAL AND MANUFACTURING PROCESS MUST COMPLY permission from the Company. This drawing and/or technical information is the property of the Company and is ASSA ABLOY SCALE 1:3 IRFACE/FINISH DOCUMENT ID D000922352-000 WITH ASSA ABLOY AMERICAS PRODUCT COMPLIANCE loaned for mutual assistance to be returned when its DRAWING NUMBER (ALT ID) 7065 SPECIFICATION DOCUMENT ID# D001117360. SURFACE AREA 262.777 in² ourpose has been served or upon the request of the 1.671 lb 82.591 in3 Company New Haven, C Company. SHEET 1 OF 2 5 4 CONFIGURATION metal door LEGACY ID

REVISIONS ZONE REV. DESCRIPTION NAMEDATE APP/DATE See Sheet 1

UNLESS OTHERWISE DRAWING COMPLIES SPECIFIED TOLERANCES WITH ASME Y14.5M - 1994 DRAWING COMPLIES MATERIAL ORK DOOR MANUFACTURERS TEMPLATE NOTICE TO PERSONS RECEIVING THIS DRAWING AND/OR TECHNICAL INFORMATION Sargent Manufacturing Company claims proprietry rights to the material disclosed hereon. ELECTRIFIED MORTISE LOCK This drawing and/or technical information is issued inconfidence for engineering information only X.XXX MM ANGLES FRACTIONS DESIGNED BY DATE CREATED 04/26/2018 THIRD ANGLE PROJECTION HEAT TREATMENT and may not be reproduced or used to manufacture anything shown or referred to hereon without direct written permission from SURFACE FINISH 63 FRM Sargent Manufacturing Company to the user. The drawing and/or technical information is the DOCUMENT ID D000922352-000 SCALE 1:3 SURFACE/FINISH property of Sargent Manufacturing Company and is loaned for mutual assistance to be returned Sargent Manufacturing Company New Haven, CT DRAWING NUMBER (ALT ID) 7065 surface area 265.891 in² PART NUMBER 1.837 lb 90.807 in3 when its purpose has been served.