ETW Template for AB7502 4-1-2in Height – T-557-Rev01

Template No. T557

Rev. 1 8/4/99 RAM

SIZE: 4 1/2"

FOR BEVELED EDGE DOORS

ETW MAXIMUM ELECTRICAL RATING CONTACT THROUGH WIRE VOLTS 48V DC/AC AMPERES 3.5A CONTINUOUS CURRENT

16.0A CURRENT INRUSH (300 MILLISECONDS)

DRILLING INSTRUCTIONS

NOTE A:

DRILL AND DEBURR Ø 1" HOLE IN FRAME REINFORCEMENT FOR THROUGH WIRES.

NOTE B:

• 1. NON-HANDED INSTALLATION-DRILL AND DEBURR TWO (2) Ø 3/4" HOLES IN DOOR REINFORCEMENT PLATE FOR THROUGH WIRES.
• 2. RIGHT HAND INSTALLATION-DRILL AND DEBURR Ø 3/4" HOLE FOR THROUGH WIRES IN DOOR REINFORCEMENT PLATE ON BOTTOM LEFT.
• 3. LEFT HAND INSTALLATION-DRILL AND DEBURR Ø 3/4" HOLE FOR THROUGH WIRES IN DOOR REINFORCEMENT PLATE ON UPPER RIGHT.

3/32 ———————————————————————————————————

-DO NOT SCALE-

SEE NOTE B

437

CATALOG NUMBER	METAL
STEEL HINGES	GAUGE
AB7502	.187

SEE NOTE A

ALL DIMENSIONS ARE IN INCHES.

Machine Screw Size- 12-24 x 1/2" F.H. Wood Screw Size- No. 12 x 1 1/4" F.H.

Designed to swing doors completely clear of the opening when door is opened $95^\{\backslash circ\}$ . When opened $90^\{\backslash circ\}$ , door projects 11/64 (4.37) past stop of jamb.

1.046

508

NOTE: This hinge alters the normal pivot point of door. For door closers, friction or overhead door holders to be used in conjunction with this hinge, consult manufacturer of the device for application details.

Hospital type template hinges conform to the above screw size and location. They are designated by "HT" to catalog number.

Hager template hinges are made in gauge and with screw holes located to conform to ANSI-A156.7.

HAGER RESERVES THE RIGHT TO MAKE DESIGN CHANGES WITHOUT NOTICE. CALL HAGER ENGINEERING AT 1-800-325-9995 FOR LATEST REVISION DATE OF TEMPLATE.

HAGER COMPANIES

139 VICTOR STREET P.O. BOX 12300 ST. LOUIS, MISSOURI 63157-0300

2.250

.812