ETM- 127 mm Template t529m

TRICON - FULL MORTISE

TEMPLATE HINGES

REVISION 8-15-05 1 ECO CT05035 RAM

Template No. T529M

ELECTRIC THROUGH WIRE

AND MONITOR TYPE ETM

127.00 x 101.60, 127.00 x 114.30, 127.00 x 127.00 SIZES:

ETM MAXIMUM ELECTRICAL RATING SWITCH VOLTS 30V DC AMPERES .500A CONTACT THROUGH WIRE VOLTS 48V DC AMPERES 3.5A CONTINUOUS CURRENT 16.0A CURRENT INRUSH (300 MILLISECONDS)

DRILLING INSTRUCTIONS

NOTE A: DRILL AND DEBURR Ø 25.40 mm HOLE IN FRAME REINFORCEMENT FOR THROUGH WIRES.

NOTE B: 1. NON-HANDED INSTALLATION-DRILL AND DEBURR TWO

(2) 19.05 mm HOLES IN DOOR REINFORCEMENT PLATE

FOR THROUGH WIRES.

RIGHT HAND INSTALLATION— DRILL AND DEBURR Ø 19.05 mm

HOLE FOR THROUGH WIRES IN DOOR REINFORCEMENT PLATE ON BOTTOM LEFT. 3. LEFT HAND INSTALLATION-

DRILL AND DEBURR Ø 19.05 mm HOLE FOR THROUGH WIRES IN DOOR REINFORCEMENT PLATE ON UPPER RIGHT.

DOOR LEAF FRAME LEAF 25.40 Ε 25.40 9.53 --9.53 12.90 29.74 63.50 31.75 127.00 37.70 31.75 63.50 29.74 12.90 11.10 -20.62 SEE NOTE B -SEE NOTE A

CATALOG	NUMBER			(F) DISTANCE FROI	M EDGE OF LEAF	TO SWAGE LINE
STEEL HINGES	NON- FERROUS HINGES		(E) KNUCKLE DIAMETER		127.00 x 114.30	127.00 x 127.00
AB700-ETM	AB800-ETM	3.68	15.88	41.28	47.63	53.98
AB750-ETM	AB850-ETM	4.83	18.65	39.69	46.04	52.39

ALL DIMENSIONS ARE IN MILLIMETERS. Machine Screw Size- 12-24 x 1/2" F.H.

Wood Screw Size- No. 12 x 1 1/4" F.H.

NOTE: This hinge is intended to be used in the center position.

Hospital type and round corner template hinges conform to the above screw size and location. They are designated by "HT" and "RC" to catalog number.

Hager template hinges are made in size, gauge and with screw holes located to conform to ANSI-A156.7. HAGER RESERVES THE RIGHT TO MAKE DESIGN CHANGES WITHOUT NOTICE. CALL HAGER ENGINEERING AT 1-800-325-9995 FOR LATEST REVISION DATE OF TEMPLATE.

HAGER COMPANIES 139 VICTOR STREET P.O. BOX 12300 ST. LOUIS, MISSOURI 63157–0300