Corbin Russwin Emergency Key Plate Sectional Trim for ML2000 Series Mortise Locks Template_T30555

NOTES:

BACKSET IS MEASURED FROM CENTERLINE OF BEVEL WHICH IS CENTERPOINT OF DOOR THICKNESS.

2. DIMENSIONS GIVEN IN INCHES AND (MM).

TEMPLATE CROSS REFERENCE
DESCRIPTION	TEMPLATE
ML2000, ML2200 Series Mortise Lock	130600
ML 2000, ML 2200 Series Mortise Lock (HT)	130607

Y-Y* ON LOCK TEMPLATE
2-3/4 (69.9) BACKSET (SEE NOTE 1) BEVEL 1/8 [N 2' MORTISE LOCK CASE	34.9) 44.5)
| | `-|-' | | | | | | |
2-7/15 (51.9) ————————————————————————————————————
KNOB/LEVER
1
Y
OUTSIDE FACE OF DOOR

RESPONSIBILITY

Door and frame Manufacturers are responsible for providing adequate construction or reinforcements for proper installation of hordeans shown. All architectural builders hardware must be installed on properly reinforced doors and frames, regardless of the type, agterial, or method of construction.

EMERGENCY KEY PLATE

FOR MORTISE LOCK SECTIONAL TRIM

www.corbinrusswin.com

SANGERS T30555 TO CUE

8-99 TEMPLATE

T30555-1