Corbin Russwin DC6000 Series DC6210, DC6410 Surface Door Closer with A14 Arm Parallel Arm Mounting Template_T31021

MOUNTING INFORMATION

Sex nuts or through bolts are required for wood and plastic covered composite doors, and any type of door without reinforcements and recommended for wood core and metal clad (Kalamein) type doors.

Opening Maximum	А	В	Min Door Width
90°	12-3/4	11-5/8	27-3/4
	(324)	(295)	(705)
180°	8-11/16	7-9/16	23-5/8
	(221)	(192)	(600)

RH SHOWN LH OPPOSITE

NOTES:

• Dimensions "A" & "B" apply to centerline of hinge/pivot for butt, swing clear, offset and center hung pivots.
• Maximum degree of opening for center hung pivot is 140°

Closer To Be Installed In A True Horizontal

• 3. Dimensions given in inches and (mm).
• 4. Minimum Top Rail: 4-3/16 (106.4)

CAUTION: Position To Ensure Proper Closer Performance. Door Sex Nut Thickness Length "L" 1-9/32 (33) 1-3/8 (35) 1-3/4 (44) & Over 1-21/32 (42) Note: Angle Support Must Be Drilled And Tapped In The Field To Accept Fifth 9/16 Dia. Bracket Screw (14.3)1/4-20 Tap For (50.8)2-3/4 Machine Screw Sex Nut Detail Or Drill For #14 Wood Screw (69.9)(25.4)1-1/2(2 Places) 5/8 1/2 3/8 Dia (38.1)(15.9) (12.7)(9.5)(50.8)15/16 3/8 1/4 (6.4) (50.8)Door (23.8)(9.5)(38.1)447F14 (M85) Angle Support Bracket 2-3/4 (69.9)5" (127 Outer Stop Mounting Surface 3/4 (19) Holes Hinge 1/4-20 Tap For Machine Screw Or Pivot (15.9)or drill a 3/16 (5) diameter pilot hole for a #14 Wood Screw in 1-1/8(15.9)Wood Applications. (28.6)Max (9 Places) Stop Face Min. Stop Friction Hold-Open Arm (A14) (12.7)(60.3)Spacer (50.8)For Fifth (76.2)Screw For (25.4)1/2 (12.7) Or 5/8 (15.9) 15/16 Door Stop Depth

RESPONSIBILITY

4-5/16

(109.5)

11-5/8

(295)

1-5/16

(33.3)

Door and Frame Manufacturers are responsible for providing adequate construction or reinforcements for proper installation of hardware shown. All architectural builders hardware must be installed on properly reinforced doors and frames, regardless of the type, material, or method of construction.

DC6210 Series By A14 DC6410 Series By A14

Full Cover

Surface Door Closer Parallel Arm Mounting By Friction Hold Open Heavy Duty Arm

Corbin 78 Russwin 28

Sex Nut Application: — Enlarge To 3/8 (9.5) Dia

This Side Only

(4 Places)

(23.8)

Sex Nut Application: 9/32 Dia. (7.1) Thru Clearance For 1/4-20

Machine Screw

(4 Places)

www.corbinrusswin.com

Do Not Scale Drawing Supersedes Dr. App. Date 07-06 Template Number T31021