Corbin Russwin DC3000 Series DC3210 Surface Door Closers Parallel Arm Mounting 597F58 Plate Template_T30613

Open the original PDF document

View PDF

MOUNTING INFORMATION

Sex nuts or through bolts are required for wood and plastic covered composite doors, and any type of door without reinforcements and recommended for wood core and metal clad (Kalamein) type doors.

RH SHOWN OPPOSITE

DOOR

TEMPLATE CROSS REFER RENCE
DESCRIPTION TEMPLATE
DC3210, DC3610 T30612
DC3210, DC3610 × M80 & M83 T30616
DC3210, DC3610 x M83 T30615
DC3210, DC3610 x M82 T30614

1-21/32 (42.1)-FOR 1-3/4 (44.5)

INCH DODRS

CAUTION: CLOSER TO BE INSTALLED IN A TRUE HORIZONTAL POSITION TO ENSURE PROPER CLOSER PERFORMANCE.

NOTES:

CLOSER

OPENING

DIMENSIONS GIVEN IN INCHES AND (MM).

A

  • TO OBTAIN EXTRA CLOSING FORCE, ADD 3" (76.2) TO DIMENSIONS MARKED BY ASTERISK (*). THIS WILL LIMIT DEGREE OF DOOR OPENING TO 110°.
  • 3. PARALLEL ARM BRACKET MAY BE MOUNTED ON STOP AS SHOWN OR RABBET. REFER TO TEMPLATE T30529 FOR MOUNTING DIMENSIONS.

R

DIMENSIONS MARKED (*) APPLY TO CENTERLINE OF HINGE/PIVOT FOR BUTT. SWING CLEAR, OFFSET AND CENTER HUNG PIVOTS.

C

SERIES MAXIMUM A В С CONDITION INCH DUDKS (LENGTH MAY VARY
DC3610 180° *3-1/4
(82.6) 		2-3/8
(60.3) 		10-3/8
(263.5) 		BUTTS, DFFSET
PIVOTS, AND
SWING CLEAR
HINGES
CENTER HUNG 		FOR OTHER DOOR THICKNESSES)
DC3210 180° * 2"
(50.8) 		3″
(76.2) 		11-5/8
(295.3) 		BUTTS, DFFSET
PIVOTS, AND
SWING CLEAR
HINGES
CENTER HUNG 		3/8 DIA.
9/16 DIA
(9.5) (14.3)
SEX NUT DETAIL
3 ( 7/16
11.1)
1-3/4
95.3)
1/4-20 TAF
0R DRILL F
(4 PLACES 		PFOR MACH
FOR #14 WOI
PPLICATION
7.1) THRU
0 MACHINE: 		DD SCREW: CLEARANCE 0.7) *A PARALLEL ARM BRACKET DUTER MINIMUM TOP RAIL HINGE OR PIVOT 2" 3" (50.8) (76.2) 15/16 (23.8) PLATE (M80) 1/4 (6.4) (69.9) SEX NUT APPLICATION: ENLARGE TO 3/8 DIA. THIS SIDE ONLY (4 PLACES)

RESPONSIBILITY

Door and Frame Manufacturers are

responsible for providing adequate construction or reinforcements for proper installation of hardware shown. All architectural builders hardware must be installed on properly reinforced doors and frames, regardless of the type, material, or method of construction

DC3210 SERIES BY M80 DC3610 SERIES BY M80

SURFACE DOOR CLOSER PARALLEL ARM MOUNTING BY PLATE

DO NOT SCALE DRAWING

SUPERSEDES ΚJ

TEMPLATE 5 / 7 / 9 3 NUMBER