Corbin Russwin Access 700 TCPAC ML20700 Series Template_T31076

Open the original PDF document

View PDF

Notes:

  • 1. Backset is measured from centerline of bevel which is centerpoint of door thickness.
  • 1-1/8 (28.6) strike lip suits frame for 1-3/4 (44.5) thick door, lip will vary for other door thicknesses.
  • 3. Dimensions given in inches and (mm).

ML20700 TCPAC Series

CAUTION: DOOR & FRAME MANUFACTURERS

When door gasketing or silencers are used, proper allowances must be made for strike location to maintain a common centerline with lock and door as shown so that bolt will freely enter strike.

Line "Y-Y" corresponds to Plaster Guard by Frame Manufacturer 1-1/4 "Y-Y" on Trim Templates (31.8)1" Min. Min. (2.4)(25.4)1-1/16 (27)(114 1-1/8 2-3/4 Backset Frame (28.6)(69.9)(See Note 2) (See Note 1) Bevel (56)1/8 in 2 Ø1/2 2 Places 3.2 in 50.8 (32) INSIDE FACE OF DOOR #12-24 Tap for Combination Screw Deep (2 Places) (4 Places) 9/16 2-3/4 4-1/2 Strike/Lock/Door (6) Max Lock/Door (70)(114)<u>1-1/4</u>-.000 4 Places Cylinder Hole -Door Ø1-5/16(33) (31.8)Ø1-1/2 (38) 2-1/4 5/8 Thickness Outside Onlv (9.5)(57) x 3/4 (19) For Functions: ML20734, 36 (15.9)3/4 Max. Deep 4-1/8+ Inside Only (104.8)(19.1)12 4-15/16 (203.2)(125) 2-7/16 Cylinder 4-7/8 3-1/2 4-3/4 (61.9)7/32 (101.6)1-3/16 (120.7)(5.6) \overline{(123.8)} \overline{(88.9)} (30.2)Strike 3 - 5/86-1/2 Min. (92.1)(165.1)Lock (9.5)7-1/4 1-1/2 Lever (184.2)Latch Bolt 3/4 (38.1) 1-1/2 (19.1)(38.1)Min. 9/16 7/32 1-1/4 -.000 (14.3)(5.6)Turnpiece Hole (15.9)Ø5/8 (15.9) Inside Only (31.8) Door Detail For Functions: ML20735.36 Ø3/4 (19.1) Thru -FRAME DETAIL Standard Trim Tolerances -Ø3/8 (9.5) Thru Description ANSI Strike Ø1-1/16 (27) Thru -Inches (mm) (2 Places) Latch & Dead Bolt Holes 236L72 MUSÉO Trim (.127).005 Latch Bolt Hole Only 236L73 (.381).015

RESPONSIBILITY

And Optional Box 120F76

DOOR AND FRAME MANUFACTURERS ARE RESPONSIBLE FOR PROVIDING ADEQUATE CONSTRUCTION OR REINFORCEMENTS FOR PROPER INSTALLATION OF HARDWARE SHOWN. ALL ARCHITECTURAL BUILDERS HARDWARE MUST BE INSTALLED ON PROPERLY REINFORCED DOORS AND FRAMES, REGARDLESS OF TYPE, MATERIAL, OR METHOD OF CONSTRUCTION.

Access 700° TCPAC ML20700 Series Mortise Lock

Corbin Russwin

ASSA ABLOY

www.corbinrusswin.com

SUPERSEDES T31076-1 DO NOT SCALE DRAWING TEMPLATE NUMBER T31076-2 DATE 05-11