Clean Copper Adhesive-EXIT DEVICE

CLEAN COPPER

COPPER ADHESIVE EXIT DEVICE 26" X 4.625"

NOTES

1. ALL ADHESIVE TO BE CUT TO SIZE TO FIT THE ACTUAL ITEM

• 2. Clean Copper surfaces should be cleaned and sanitized regularly according to standard practices, just like other surfaces.
• 3. Clean Copper Surfaces may be subject to recontamination and the level of active bacteria at any particular time will depend on the frequency and timing of recontamination and cleanliness of the surface (among other factors)
• 4. Clean Copper surfaces must NOT be waxed, painted, lacquered, varnished or otherwise coated
• 5. Routine cleaning to remove dirt and filth is necessary for good hygiene and to ensure the effective performance of the copper alloy surface. Cleaning agents typically used for traditional touch surfaces are permissible and should be used in accordance with the product label. The appropriate cleaning agent depends on the type of soiling and the measure of sanitization required. Normal tarnishing or wear of Copper surfaces will not impair the effectiveness of the product as the property is inherent to the bulk materials.
• 6. These products are not approved for use in any form that has direct food contact or as food packaging.
• 7. Clean Copper surfaces may be used in hospitals, other healthcare facilities, and various public, commercial, and residential buildings for approved non-food contact surfaces. Surfaces that may be exposed to outdoor environmental conditions (ex. handrails, shopping carts, and ATM machines) are not representative of indoor laboratory conditions, and therefore, may impart reduced efficacy if not cleaned when visibly soiled.

www.abhmfg.com E-mail: abhinfo@abhmfg.com Architectural Builders Hardware Mfg., Inc. EXIT DEVICE PUSH BARS

1222 Ardmore Ave., Itasca, IL 60143 630.875.9900; FAX 800.9FAXABH (932.9224)

c 2020 ABH Mfg., Inc. printed in USA

CLEAN COPPER ADHESIVE-

CLEAN COPPER ADHESIVE-ED PUSH BARS.DWG

ISSUED 5-21-20 PAGE 1 OF 1