Camden CX-12 Plus Product Comparison Reference Guide
Open the original PDF document
View PDF
CX-12 PLUS vs TDM
| DESCRIPTION | CAMDEN | TDM | BENEFIT / APPLICATION |
|---|---|---|---|
| MODES: | |||
| #1 - Simple Time Delay | Yes | Yes | Basic operation, with one relay utilized |
| #2 - Make/Break Relay | Yes | Yes | Simple interface of strike and operator |
| #3 - Bi-Directional Door Sequencer | Yes | Yes | Sequence two doors in both directions (with vestibule crossing ability) |
| #4 - Apartment Interphone Access | Yes | No | Features a direct connection to interphone panel without requiring an isolating relay. Also includes vestibule courtesy switch input. |
| #5 - Access Control Application | Yes | No | Allows connection of a keypad, time-clock or similar access control device to activate and hold an electric lock indefinitely, with Automatic Door activation from the inside. |
| #6 - Fire Alarm Application | Yes | No | Allows a continuous Fire alarm signal to fire the strike momentarily, and then hold open the door indefinitely. |
| #7 & #8 - Latch Modes | Yes | No | Latch modes can latch both relays on, or just one, with the other timer controlled. |
| FEATURES: | |||
| Wet Inputs | Yes | No | Allows connection to devices like 3-terminal radio receivers, Enterphones, etc. |
|
User Friendly Straight forward
design |
Yes | No | No elaborate LED displays or confusing programming instructions required. |
| Maintained Input (Extended trigger) setting | Yes | No | Allows for connection to continuous devices such as sensors, mats, key switches. |
|
"One shot" (Momentary trigger)
setting |
Yes | No | Allows for a stuck switch to be ignored without compromising security, yet still allowing the other inputs to function |
| Wet output | No | Yes | Not included as it often leads to confusion of installers, and blown transformers. |
| SPECS: | |||
| 12-24 V AC/DC | Yes | Yes | Industry standard. |
| 3 AMP Contact Rating | Yes | Yes | Industry standard. |
| 4 Inputs | Yes | Yes | Two wet, and two dry in our case |
| Memory setting retained | Yes | Yes | Standard |
| Time Delays |
1 – 30
seconds |
1 – 99
seconds |
Typically time is set in the automatic door operator, however the industry standard 30 seconds is quite adequate |
| Push button Fault indicator | Not required | Yes | Not required as programming is done with a simple 2-position dipswitch |
| Warranty | 3 years | 1 Year | Best backed and most reliable electronics in the Industry |