52 SERIES

MODELS 52 & T52

SUPER MASTER OPERATIONS

The following instructions cover Model 52 & T52 Super Master Operations. The Super Master Combination is a six-digit combination used to reset the lock to the factory default combination (50 25 50) in the event the user combination(s) are lost.

SET SUPER MASTER COMBINATION

WARNING: Super Master Control will be permanently lost if you do not change the default Super Master Combination prior to changing any User combinations. Caution: Once the Super Master Combination is set, it can never be changed. Record the combination and store it in a secure place.

• 1. If operating a self-powered lock, power the lock by turning the dial back 4 and forth 3 in both directions until simultaneous green G and red ^R flashes display with a beep 8.
• 2. Press . Press . One green flash G displays with a beep 8.
• 3. Enter the factory default Super Master Combination of . One green flash G displays with a beep 8.
• 4. Enter the new six-digit Super Master Combination. One green flash G displays with a beep 8.
• 5. Enter the new Super Master combination again for verification. Simultaneous green G and red R flashes indicate operation completed successfully.

RESET LOCK USING SUPER MASTER COMBINATION

• 1. If operating a self-powered lock, power the lock by turning the dial back 4 and forth 3 in both directions until simultaneous green G and red ^R flashes display with a beep 8.
• 2. Press . Press . One green flash G displays with a beep 8.
• 3. Enter the Super Master combination. Simultaneous green G and red R flashes indicate operation completed successfully.

Note: The lock is now set to the factory default: Single Mode with an opening combination of "50 25 50".

DETECT IF SUPER MASTER COMBINATION IS ACTIVE

• 1. If operating a self-powered lock, power the lock by turning the dial back 4 and forth 3 in both directions until simultaneous green G and red ^R flashes display with a beep 8.
• 2. Press . Press .

If the Super Master User combination has not been disabled (i.e., no User combination has been changed) and has not been activated, two red flashes ^{R R} display.

If the Super Master combination is active, five red flashes ^{R R R R R} display.

If the Super Master combination has been permanently disabled, a green flash G displays.

Kaba® Mas Corporation 749 W. Short Street, Lexington, KY 40508 USA Phone: (859) 253-4744 FAX: (859) 255-2655 Technical Support: (800) 950-4744 www.kaba-mas.com