Allegion_Master_Key_Summary_2013.xlsx_105458

Open the original PDF document

		MASTER KEY SYSTEM SUMMARY		This form must be attached to the Master Key Order form and P.O. Please provide as complete and accurate as possible so we can provide what you need for your Key System.
Job Name				Account
Address				No.
City / State				P.O.#
Country
	For detailed instructions on how to complete this form please refer to pages 4 & 5
System Overview
New	Attached Dealer Specified Combinations	Existing (provide info below) Registry #
		Structure or Factory Order #
		1. Select System
Schlage Classic Everest ® C (Open) D (Restricted ) Everest 29 ™ S (Open) T (Restricted )	Classic Primus ®/ Primus ® XP B (Small Format IC, Restricted ) Primus®/Primus® XP Primus ®/Primus ® XP * R (Small Format IC, Restricted ) Primus ®/Primus ® XP	keyways and have the following relationships:	Falcon Standard Schlage C Restricted *	Interchangeable Core A2 Interchangeable Core A4 Everest 29 keysections are backwards compatible to Everest R family sections > B family keyways S family sections > C family keyways T family sections > D family keyways
Type	Primus ®/Primus ® XP * 6 - Pin	Construction Keyed Yes		* = Attach required documentation
5 - Pin See compatibility chart on page 5	7 - Pin	Full Size Construction Cores (Schlage Only) ICA	No ICB	ICC
Keyway Specified **:		Small Format Construction Cores Green Construction Keyed Type	Brown	Black
	** = The Commercial Master Key Department makes the final decision in the selection of key sections	Falcon Schlage	CK (BOK) CK (Split)	Lost Ball RCK (5-Pin C only)

	2. Select Keys & Key Stamping
Change Keys No. of Keys per Symbol No. of Keys per Cylinder Type Standard Bow Standard Bow (Unembossed) Key Stamp Details Do Not Keyset Symbol Duplicate	Access Bow Large (Schlage Only) Bow With Custom Die
(DND) Non-standard Code (Specify)	(Specify)
Change Key Packaging and Shipping Instructions Pack Keys Independently (PKI) of Lock or Cylinder *** Yes No If PKI, ship change keys to : Dealer Other See Primus Facesheet	*** = Furnished standard at no charge with Split-Key construction keying
	3. Select Cylinder Stamping
Cylinder Stamp Details With Industry Standard Key Symbol	Cylinder Stamping Location Plug Face (N/A in Primus) - VKC
Non-Standard Code (Specify)	Concealed (N/A in Falcon STD) - CKC

4. Select Key Quantities
Level	Qty. Per	Master Key Symbol (s)		Total Quantity
GGM
GM
MK or RMK
Control
Emergency
Others

Ship Master Keys to:
Dealer		See Primus Facesheet	Other
Special Function
		Qty. Per		Qty. Per
RCK (Lost Ball) ****				Full Size Construction Core Keys (Schlage Only)
CK (Split-Key) ****				Full Size Construction Core Control Keys (Schlage Only)
Extractor Tools ****			Small Format Construction Core Keys
				Small Format Construction Core Control Keys
				**** = Used with Construction Keying

		5. Select Master Key Future Expansion
List Future MK Symbols				Approx. # of Change Key Symbols Under Each Future MK
Example:
MK		BJ, BK	40 each
GGM
GM
MK
MK
MK
Others

		6. Select Operating Instructions		(Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders)
Cross Keyed Cylinder		is operated by these change keys	Cylinder	Cross Keyed is operated by these change keys
X			X
X			X
X			X
X			X

7. Instructions and Compatibility

If you do not know the registry number (R#), structure number or the original factory order number for an existing

Fax 1-800-452-0663 Tel. 1-877-671-7011

Only one structure may be ordered on the same purchase order
Classic refers to Obverse, Numbered (Paracentric), Quad, and Reverse key section families
Classic Primus refers to Primus Obverse and Primus Quad key section families

▪ Schlage only

6-pin for Schlage and Falcon
Split-Key construction keying is not available for Classic Primus or Everest Primus

▪ Refer to the compatibility chart

Unless otherwise specified, industry standard key symbols are stamped on Everest™ and Primus® keys
For custom die, attach RFQ approval for Schlage

▪ For cylinder type refer to the compatibility chart

▪ Schlage Commercial's default key section for new Master Key Systems is Everest ™ S145

▪ Unless otherwise specified, the control key has the same cut as the highest-level key in the system (Except SFIC systems)

▪ Construction keys are not furnished unless specified

▪ Unless otherwise specified 2 change keys are furnished per lock or cylinder

▪ Do not use the letters "I", "O", "CK", "KA", or "KD" for any master key symbols

Cross keying reduces the security and expansion of key systems
Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders