ALARM LOCK

345 Bayview Avenue, Amityville, New York, U.S.A. 11701 For Sales and Repairs 1-800-ALA-LOCK • For Technical Service 1-800-645-9440

Fax: 631-789-3383 • info@alarmlock.com

Note: Technical Service is for security professionals only

ALARM LOCK Tech Support

Date: Friday, February 15, 2019

F.A.Q. Subject: Enabling a User Code to Toggle Passage Mode

Models: Trilogy T3 Locks (Excluding DL2800, DL3000)

Keypad Programming

To enable "Group 2 Toggles Passage Mode", place the lock into Passage Mode by pressing the Master Code followed by the ; key after the green light turns off. Once in program mode, press ;51;2: . In addition, be sure to add a User Code to Group 2 (users 101- 150).

DL-Windows Programming

In DL-Windows, click the Lock Profile, then click Features .

In the Features screen (shown below), check the Group 2 Toggles Passage Mode checkbox.

ALARM LOCK

345 Bayview Avenue, Amityville, New York, U.S.A. 11701 For Sales and Repairs 1-800-ALA-LOCK • For Technical Service 1-800-645-9440

Fax: 631-789-3383 • info@alarmlock.com

Note: Technical Service is for security professionals only

As with keypad programing, you will also need to add a User code to Group 2 using the Global Users screen (shown below). First highlight the user and click Assign Groups .

Finally, at the bottom of the Group Assignment dialog (shown below), add a check to the Group 2 checkbox, then click Save .