Alarm Lock If a New Schedule is not Working (For all T3 and Networx Locksets)

ALARM LOCK

345 Bayview Avenue, Amityville, New York, U.S.A. 11701 For Sales and Repairs 1-800-ALA-LOCK • For Technical Service 1-800-645-9440 Fax: 631-789-3383 • info@alarmlock.com

Note: Technical Service is for security professionals only

ALARM LOCK Tech Support

Date: Wednesday, January 4, 2012

Subject: A New Schedule is Not Working

Models: All T3 and Networx Locksets

This Information applies to all Alarm Lock T3 locksets and to all methods of programming, including: Keypad programming, programming directly from a PC, and PC / DTM programming. This information also applies to the wireless Networx system.

When any type of scheduled event is sent to the lock, do not expect the scheduled event to take effect immediately after sending the program to the lock. For example, if you create a Passage Mode schedule for "every day from 9AM to 5PM", and then send the programming to the lock today after 9AM, the lock will not enter Passage Mode until tomorrow at 9AM.

Remember: The lock only reacts to events scheduled to happen after sending the program to the lock. All events in your schedule that are set to happen before the moment you send the program to the lock will NOT occur until the next programmed day.