Alarm Lock Door Prep for 2-1-8inch auxiliary deadbolt

ALARM LOCK

345 Bayview Avenue, Amityville, New York, U.S.A. 11701 For Sales and Repairs 1-800-ALA-LOCK • For Technical Service 1-800-645-9440 Fax: 631-789-3383 • info@alarmlock.com

Note: Technical Service is for security professionals only

ALARM LOCK Tech Support

Date: Monday, September 26, 2011

Subject: Door Prep for adding a standard 2⅛" boar auxiliary deadbolt located above most

Alarm Lock Trilogy locksets

Models: DL2700, DL2800, DL/PDL3000, DL3200, DL/PDL3500, DL/PDL4100,

DL/PDL4500, DL5200, DL/PDL5300, DL/PDL6100 and DL/PDL6500

This chart can be used with the installation of most Alarm Lock locksets when an additional auxiliary deadbolt is required.

ALARM LOCK MODEL NUMBER	INSTRUCTIONS	MINIMUM CENTER TO CENTER
Standard 2⅛" Bore Models: DL2700, DL2800, DL/PDL3000, DL3200, DL/PDL4100, DL5200, DL/PDL5300	Measure from the center of the Alarm Lock 1" diameter latch hole to the center of the aux deadbolt 2⅛" hole.	8¼"
Mortise Lock Models: DL/PDL3500, DL/PDL4500	Measure from the center of the Alarm Lock mortise body to the center of the aux deadbolt 2⅛" hole.	9¼"
Networx 2⅛" Bore Models: DL/PDL6100	Measure from the center of the Alarm Lock 1" diameter latch hole to the center of the aux deadbolt 2⅛" hole.	10¾"
Networx Mortise Lock Models: DL/PDL6500	Measure from the center of the Alarm Lock mortise body to the center of the aux deadbolt 2⅛" hole.	11½"

Note: If the diameter of the auxiliary deadbolt plate is greater than 2½" you must increase the center-to-center dimensions accordingly.