ASSA ABLOY ACCENTRA_535F Trim_1500-2100-7100(F) Rim_VR_Exit_templ_7400-1535

NOTES: 1. Backset is measured from centerline of bevel which is the centerpoint of the door thickness. 2. 1-1/8 (28.8) Strike Lip suits frame for 1-3/4 (44.5) thick door.Lip will vary for other door thicknesses. 3. For preparation of trim, refer to separate template. 4. Dimensions given in inches and (mm). 5. Door fabricator to provide a Ø3/8 (9.5) minimum raceway through door to allow the insertion of electrical wires running between lock mortise and electric hinge. Inside Face Of Door 535F OUTSIDE FACE OF DOOR Vertical Reference (Trim Centerline) 3/4 (19) Radius 1/2 (12.7) Dia. Typ. Horizontal Reference (Device Centerline) (67)Cutout 1-1/4 (32) Deep (92)Outside Face 1/2 (12.7) Dia. 1/8 (3.2) Deep 3/8 (9.5) Dia. Thru Door (4 Places) (34.9) 9-15/16 11/16 (252)6 - 7/16(17.5)(163.5)1/2 (12.7) Dia. Thru Door Section X - X RESPONSIBILITY ASSA ABLOY DOOR AND FRAME MANUFACTURERS ARE 535F Trim Application RESPONSIBLE FOR PROVIDING ADEQUATE With 1500(F), 2100(F) or 7100(F) Series CONSTRUCTION OR REINFORCEMENTS FOR PROPER INSTALLATION OF HARDWARE SHOWN Rim and Vertical Rod Exit Devices ALL ARCHITECTURAL BUILDERS HARDWARE MUST Wood or Composite Door Preparation BE INSTALLED ON PROPERTY REINFORCED SUPERSEDES DO NOT SCALE DRAWING DOORS AND FRAMES, REGARDLESS OF TYPE, TEMPLATE NUMBER Contact us for support at 1-855-557-5078. 7400-1535 12 - 23MATERIAL, OR METHOD OF CONSTRUCTION.

Experience a safer and more open world