ASSA ABLOY ACCENTRA_534F Trim_1500-2100-7100(F) Rim_VR_Exit_templ_7400-1534

NOTES: 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template. 2. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. Preparation is typical for both door hands. 5. Provide adequate structural support to maintain door integrity during operation. 6. Prepare mounting holes when installing trim. Inside Face Of Door 534F OUTSIDE FACE Vertical Reference OF DOOR (Trim Centerline) Horizontal Reference (Device Centerline) 11/16 (17.5)/2 (12.50) Dia. 1/8 (3.2) Deep 3/8 (9.50) Dia. Thru Door 9-15/16 (4 Places) 1/2 (12.50) Dia. (Thru Door) Х Section X - X

RESPONSIBILITY

DOOR AND FRAME MANUFACTURERS ARE RESPONSIBLE FOR PROVIDING ADEQUATE CONSTRUCTION OR REINFORCEMENTS FOR PROPER INSTALLATION OF HARDWARE SHOWN. ALL ARCHITECTURAL BUILDERS HARDWARE MUST BE INSTALLED ON PROPERLY REINFORCED DOORS AND FRAMES, REGARDLESS OF TYPE, MATERIAL, OR METHOD OF CONSTRUCTION.

534F Trim

With 1500(F), 2100(F) or 7100(F) Series Rim, Mortise and Vertical Rod Exit Devices Wood or Composite Door Preparation

Contact us for support at 1-855-557-5078.

ASSA ABLOY

SUPERSEDES 8/99 DO NOT SCALE DRAWING TEMPLATE NUMBER 7400-1534 DATE 12-23