ASSA ABLOY ACCENTRA 673F Trim for 1500(F), 6100ED(F), and 7100(F) Series Wide Stile Mortise_7400-1673

OUTSIDE FACE OF DOOR 673F Section X - X 11/16" (17.5) 1/2" (12.7) Dia. Thru Door 1-3/8" (34.9) 2-1/16" (52.4) Inside Face Of Door 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template. 2. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. Preparation is typical for both door hands. 5. Shaded area represents mortise lock cavity from device template. 6. Provide adequate structural support to maintain door integrity during operation. NOTES : 3/8" (9.50) Dia. Thru Door (4 Places) Slot 1-3/8" (35) Deep Lock 5/8" (16) Radius-Typ. CL CL Vertical Reference (Trim Centerline) CL X 3-5/8" (92) 3-5/8" (92) 1-1/2" (38.1) 1-3/4" (44) 9-1/2" (241.3) 1-1/4" (31.8) Dia. 1-3/8" (35) Deep X Horizontal Reference (Device Centerline)

RESPONSIBILITY

DOOR AND FRAME MANUFACTURERS ARE RESPONSIBLE FOR PROVIDING ADEQUATE CONSTRUCTION OR REINFORCEMENTS FOR PROPER INSTALLATION OF HARDWARE SHOWN. ALL ARCHITECTURAL BUILDERS HARDWARE MUST BE INSTALLED ON PROPERLY REINFORCED DOORS AND FRAMES, REGARDLESS OF TYPE, MATERIAL, OR METHOD OF CONSTRUCTION. Contact us for support at 1-800-438-1951.

673F Trim With 1530(F), 6130(F) or 7130(F) Series Mortise Exit Devices

Wood or Composite Door Preparation

SUPERSEDES DO NOT SCALE DRAWING 7400-1673 (05-15)

TEMPLATE NUMBER

7400-1673 DATE

12-23